About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

What a finished roof includes and how to budget for it

In Poland, a completed roof is not just the covering but a whole system of layers and details that drain water and moisture. Rather than asking for the price of the sheeting alone, check whether the offer includes the load-bearing structure, thermal insulation, internal airtightness, flashings, fixings and accessories. The most practical starting decision is to establish where the heated part of the building ends, because this determines material quantities, details and labour. Only then assign units and costs to each layer so that offers can be compared fairly.

By |2026-11-14T17:09:52+01:002025-07-08|Building academy|Comments Off on What a finished roof includes and how to budget for it

Planning a steel building for the farm workshop

Repairing a machine in the passage between other equipment is inconvenient. Parts have nowhere to lie, tools take up the floor, and the gate has to stay open. A separate steel hall for the agricultural workshop allows these activities to be organised. However, a plan tailored to the actual repairs is needed. A place for routine servicing has different requirements from a bay for dismantling large assemblies. Start with the largest equipment that is to be handled indoors. Add space at the sides and places for setting down removed components. Check the opening of guards and access to the wheels. In a steel hall, one should not have to choose between access to the machine and keeping a passage clear. Such a conflict means that the bay is too small or badly laid out.

By |2026-11-15T04:21:49+01:002025-07-02|Building academy|Comments Off on Planning a steel building for the farm workshop

What single-module tile-effect roofing sheets offer

In Poland, single-module metal roof tiles can be useful on roofs with complex geometry and limited access, but they are not universally the cheapest or fastest to install. Before choosing, compare the coverage area rather than the external dimension, check the cutting plan and panel count, and inspect a sample joint between two rows. Assess the total cost, waste and work organisation, not the price per piece. Steel and coating parameters remain as important as the format. Leave the layout decision to the designer.

By |2026-11-14T17:10:44+01:002025-06-24|Building academy|Comments Off on What single-module tile-effect roofing sheets offer

Traditional or contemporary metal roof tiles: choosing a profile to suit the house

The choice between a classic and a modern look for a metal roof tile depends mainly on how well it suits the building's form, not on the technology. An owner should check how a given profile appears across a large roof slope and in real light, not just on a small sample. It also matters whether the roof will be clearly visible from street level and how it works with the façade and surroundings. A farmer, by contrast, may be concerned above all with the building's function and the way it is used. It is worth assessing the coherence of the whole rather than following a style label alone.

By |2026-11-15T04:21:07+01:002025-06-18|Building academy|Comments Off on Traditional or contemporary metal roof tiles: choosing a profile to suit the house

Insulating a loft for better comfort in summer and winter

Comfort in a loft depends on the whole assembly, not just insulation thickness. Before choosing a material, note whether the problem is cold, overheating, draughts or damp, as these symptoms have different causes. Check the condition of the existing roof, the operation of heating and ventilation, and the airtightness of junctions at the wall plate, windows and walls. The choice also depends on how the rooms are used and the planned finish. PIR boards and mineral wool offer different advantages, and the designer should decide the layer arrangement.

By |2026-11-14T20:38:01+01:002025-06-13|Building academy|Comments Off on Insulating a loft for better comfort in summer and winter

Is a lightweight photovoltaic roof less durable than a heavy covering?

The mass of a covering is not a simple measure of its durability. A lightweight steel system can perform its function well if it has been properly selected and installed. A heavy material also requires a suitable structure and details. With a photovoltaic roof, the whole system must be compared, including the active layer, connections, supports and loads. Kilograms per square metre alone do not determine the choice. A lighter covering can reduce the permanent load on the structure compared with a heavier variant. This is a valuable feature, particularly in some renovations. However, it does not mean that assessment of the roof truss can be dispensed with. The condition of the timber, the spacing of the members and the way forces are transmitted still require checking by the person responsible for the design.

By |2026-11-15T19:35:55+01:002025-06-11|Building academy|Comments Off on Is a lightweight photovoltaic roof less durable than a heavy covering?

What shapes the design and construction of modern tile-effect metal roofing?

In Poland, the construction and appearance of modern metal roof tiles are determined primarily by matching the profile, coating and sheet format to the roof geometry and installation conditions. Rather than relying solely on corrugation height, check whether the chosen variant can be safely laid out and delivered onto the roof without permanent deformation. Corrugation height is not an independent indicator of the whole roof's strength, because sheet thickness, supports and fixings also govern how the covering performs. Compare a sample with the façade, joinery and guttering, and leave the cutting plan and fixing decisions to the designer.

By |2026-11-14T17:11:00+01:002025-06-01|Building academy|Comments Off on What shapes the design and construction of modern tile-effect metal roofing?

Why doesn’t roof capacity in kWp tell you how much electricity will reach your home?

The capacity stated in kWp describes a photovoltaic roof under defined measurement conditions. It is not a promise of constant output, nor a number of kilowatt-hours available every day. Actual yield is determined by light, temperature, roof geometry and system losses. The benefit to the household budget also depends on when energy is generated and when it is consumed. Cell and module parameters are compared under repeatable laboratory conditions. This allows different products to be compared on a common basis. On a roof, conditions change constantly. Irradiance in the morning differs from that at midday, and cell temperature need not be the same as air temperature.

By |2026-11-15T19:35:28+01:002025-05-30|Building academy|Comments Off on Why doesn’t roof capacity in kWp tell you how much electricity will reach your home?

Why does the north wall get damp and how can you find the cause?

Stains on the north wall do not point to a single cause. Water may come from a leak, the ground or humid air in the room. Less sunlight makes drying more difficult and encourages cooler surfaces. Before choosing insulation, establish the source of the problem. Covering the stain with a board may only hide further dampness. Observe the connection between the stains and rain and wind direction. Check gutters, flashings, window sills and cracks in the façade. A mark under the window may result from a leaking detail. Dampness at the floor may require an assessment of the insulation at ground level. However, the shape of the stain alone does not give a reliable diagnosis.

By |2026-11-14T10:55:53+01:002025-05-21|Building academy|Comments Off on Why does the north wall get damp and how can you find the cause?

Do galvanised profiles really never rust? Facts about steel protection

The silver coating is often treated as a guarantee of durability without any conditions. That is an oversimplification that goes too far. Galvanised profiles are protected against corrosion, but how they are used still matters. This applies to Z-sections, C-sections, sigma profiles and omega profiles. Good protection is created together by the right product, the correct detail, dry delivery and subsequent inspection. The colour of the surface alone does not replace any of these elements. The zinc coating separates the steel from its surroundings and provides electrochemical protection under certain conditions. It is not an inert layer that remains the same throughout. Reactions involving air and moisture take place on its surface. The rate of change depends on the environment. Durability therefore cannot be reduced to a single period valid for all structures.

By |2026-11-15T19:30:43+01:002025-05-10|Building academy|Comments Off on Do galvanised profiles really never rust? Facts about steel protection
Back to top