About PiVi

This author has not yet filled in any details.
So far PiVi has created 1504 blog entries.

Winter roof maintenance: which checks help prevent damage?

Before winter arrives, the owner should establish which drainage and fixing faults need repairing ahead of frost rather than leaving them until later. It is worth checking that gutters and downpipes flow freely, the condition of flashings and the completeness of snow guards, and removing leftovers from earlier work. For sandwich panels, the tightness of joints and the condition of the core are assessed. A fault list makes it easier to plan actions before the weather hampers access and the use of repair materials.

By |2026-11-15T04:21:16+01:002023-10-08|Building academy|Comments Off on Winter roof maintenance: which checks help prevent damage?

Trapezoidal steel sheet or tile-effect metal roofing: which look and way of working suits the house?

Trapezoidal steel sheet gives a simple rhythm of longitudinal ribs. Tile-effect metal roofing also introduces transverse profiles and division into rows. Both coverings can suit a contemporary house. The choice should, however, take into account the roof geometry and technical requirements. Assess the whole system, because a similar colour does not mean similar material behaviour. Trapezoidal sheet emphasises the direction of fall. On a simple barn or small pavilion it can give a calm, uniform plane. High ribs draw the shadow more distinctly. A low profile looks more subtle, but its selection must follow from load-bearing capacity. Do not reduce the height just so that the roof resembles smooth sheet metal.

By |2026-11-14T10:54:20+01:002023-10-05|Building academy|Comments Off on Trapezoidal steel sheet or tile-effect metal roofing: which look and way of working suits the house?

Choosing stock panel lengths for a pavilion used all year

With a ready-made batch of panels, the available dimension must be reconciled with the roof's working conditions. Length affects joints, transport and the method of lifting. Colour and the temperature of the facings also matter. In an all-year pavilion, it is worth assessing these elements together rather than simply choosing the longest available piece. Confirmation of the number of pieces and their dimensions is needed. General information about availability does not show whether the batch suits the roof. Check the module, thickness, profile and edge condition. The listed features must relate to the elements that will be delivered.

By |2026-11-14T17:08:29+01:002023-09-27|Building academy|Comments Off on Choosing stock panel lengths for a pavilion used all year

How to match wall and roof panels to everyday life at home?

Panels for a house should correspond to the full design of the building envelope. It is not enough to choose a thick core and a light colour. Walls and roof have different tasks, profiles and connections. Requirements for comfort, fire and moisture are added. The material should be assessed together with the structure, windows and interior finish. Only then is the choice complete. A wall panel forms the façade and works with the designed support arrangement. A roof panel has a profile and details related to water drainage. It is also subject to snow loads. A flat wall panel should not be used on a roof slope just because it has good U.

By |2026-11-14T13:15:11+01:002023-09-17|Building academy|Comments Off on How to match wall and roof panels to everyday life at home?

What should be checked for a 40 mm roof sandwich panel in RAL 3009 with a length of 13.5 m?

A long panel can reduce the number of transverse joints on the roof. At the same time, it requires proper transport and lifting. For a 40 mm panel in RAL 3009 with a length of 13.5 m, more than appearance needs to be checked. Second grade without visible defects still requires clarification. The following description concerns the method of assessment, not current stock. There are roof panel families produced in lengths exceeding 13.5 m. However, availability depends on thickness, colour and technical conditions. The maximum catalogue length should not be taken as confirmation of every combination. Confirmation of the variant and delivery capability is needed.

By |2026-11-14T13:13:31+01:002023-09-13|Building academy|Comments Off on What should be checked for a 40 mm roof sandwich panel in RAL 3009 with a length of 13.5 m?

How to assess the price of a thin 40 mm wall panel?

A thin panel can be advantageous in a suitable application. However, it should not replace a thicker variant simply because it costs less. The price of a 40 mm wall sandwich panel depends on the core, the steel sheets, the coating and the batch. The coverage and accessories must also be checked. The figures below are for calculation purposes and are not a current quote. A 40 mm panel may be considered where the thermal requirements and other conditions permit its use. This applies to certain claddings or internal partitions. It does not mean automatic suitability for every unheated building. The loads, fire and environment must still be checked.

By |2026-11-14T13:13:33+01:002023-09-11|Building academy|Comments Off on How to assess the price of a thin 40 mm wall panel?

How to check a roofer’s skills and experience

In Poland, a roofer's quality is shown above all by how they think, not by the price per square metre alone. Check whether they can explain how the roof will be built, know the instructions for the chosen system and recognise problems that need a structural engineer. When discussing a team, ask about projects using a material similar to the one planned, because installing modular metal tiles differs from laying long trapezoidal sheets. Request a discussion of details and documentation of the stages that will later be covered. Experience matters, but it must relate to comparable work.

By |2026-11-14T17:11:20+01:002023-08-19|Building academy|Comments Off on How to check a roofer’s skills and experience

Trapezoidal steel sheet for cladding and for load-bearing applications

Trapezoidal sheet serves different functions in a building, so before choosing, establish whether the sheet is to close the partition and protect against weather or carry loads between supports. Check the support layout, loads, thickness, steel grade and product version, not just the trapezoid height. A cladding profile must also carry loads, mainly from wind. The label “structural” does not remove the need for calculations, and a similar shape does not make sheets interchangeable.

By |2026-11-15T00:24:32+01:002023-08-18|Building academy|Comments Off on Trapezoidal steel sheet for cladding and for load-bearing applications

Does Eurothane G replace the vapour control layer for the entire wall?

Eurothane G does not make the entire wall a vapour control layer, because its gas-tight facings act only on the surface of the boards, while the building element also has joints, openings and points where services pass through. Airtightness must therefore be ensured at each of these points, not only by bonding the panels. Recticel Eurothane G is a PIR board faced on both sides with a gas-tight facing and with 12.5 mm plasterboard, intended for suitable internal insulation applications. The masonry beneath it requires preparation in line with the condition of the substrate and the requirements of the new construction, not merely an assessment of the surface appearance.

By |2026-11-16T03:25:39+01:002023-08-14|Building academy|Comments Off on Does Eurothane G replace the vapour control layer for the entire wall?

Corrugated fibre cement roofing after a storm: inspection and next steps

After a windstorm, the first step is to assess the danger to people and to the interior of the building. Counting the damaged sheets can wait. Fibre cement sheets must be inspected together with their fastenings, flashings and the supporting structure. Asbestos-free fibre cement is no reason to step directly onto the roof slope, even if it looks intact from the ground. A well-organised inspection makes it possible to separate urgent securing from the actual repair and to identify the causes of the damage. From a safe position it is possible to check whether fragments of the covering, flashings or branches are lying around. It is worth paying attention to elements hanging down at the eaves and gable ends. Do not walk under a loose section or try to pull it down. Access to the endangered zone must be restricted, and the method of securing it agreed with the relevant services or the contractor.

By |2026-11-16T03:14:17+01:002023-08-02|Building academy|Comments Off on Corrugated fibre cement roofing after a storm: inspection and next steps
Back to top