About PiVi

This author has not yet filled in any details.
So far PiVi has created 1504 blog entries.

Planning the time needed to build a house and complete its roof

In Poland, the time needed to build a house depends on the design, technology, availability of crews and the sequence of deliveries, so there is no single timescale for every home. Before comparing schedules, establish what completion means: shell without roof, weathertight shell and a house ready for use are different scopes. Check whether the stated time includes formalities, utility connections, earthworks and finishing. Rather than generic declarations, ask about specific starting conditions and confirmed material delivery dates.

By |2026-11-14T17:10:27+01:002024-04-19|Building academy|Comments Off on Planning the time needed to build a house and complete its roof

Selecting a suitable covering for a mansard roof

A mansard roof is defined by its broken slopes: the lower section is usually steeper, the upper one gentler. This arrangement creates more attic space but demands careful treatment of the junction between the two zones. The covering is matched to each pitch and the overall geometry — cut or modular metal roofing may be suitable if the documentation permits. Detailing, fixings and continuity of layers also shape the result. Before buying, measure the real geometry and check for deflections, then agree the detail and installation plan with your contractor.

By |2026-11-14T20:37:56+01:002024-04-09|Building academy|Comments Off on Selecting a suitable covering for a mansard roof

Fitting a rainwater gully beneath a downpipe and keeping it accessible

The gully beneath the downpipe must stand stable, match the pipe diameters and keep its cover accessible. Plan the installation together with the surroundings of the house so that, once the surface is laid, the inspection opening is not hidden and the body does not sit too low. Roof runoff carries leaves, needles and small debris; the gully captures some of this material, which can be removed without dismantling the pipe. Construction varies by model – some have a removable basket, others a different cleaning access.

By |2026-11-15T00:23:59+01:002024-04-07|Building academy|Comments Off on Fitting a rainwater gully beneath a downpipe and keeping it accessible

How do you calculate flashings so that a small roof is complete?

Flashings determine where water flows and how the edges of the covering are finished. Their absence can halt installation even if all sheets have been delivered. The list is best drawn up on the roof plan. Every edge and every penetration should be assigned a detail. Only then can lengths and the number of ready-made sections be calculated. Start with the eaves and gable edges. Then mark the ridge, convex corners and roof valleys. Wall junctions and roof penetrations form a separate group. A chimney, vent or roof window has its own requirements. Not all elements can be replaced by a single universal flashing assembled on site.

By |2026-11-14T10:54:05+01:002024-04-05|Building academy|Comments Off on How do you calculate flashings so that a small roof is complete?

Are metal fence pickets enough for a secure fence?

A metal infill helps mark the property boundary. On its own, however, it does not guarantee the safety of children or animals, nor protection against entry from outside. What matters is the whole fence and how it is used. Metal fence pickets should therefore be chosen to suit real needs, without reducing the decision to a single slogan about strong steel. Equally important are the details that are not visible in a photo of the front. The gaps between the pickets are only part of the arrangement. Space remains at the posts, under the lower end and at the gate. A small animal may look for exactly such a place. For this reason, a dense front is not enough to assess the whole fence. The property must be walked around and all connections between sections checked.

By |2026-11-15T19:34:57+01:002024-04-02|Building academy|Comments Off on Are metal fence pickets enough for a secure fence?

How do you order made-to-measure tile-effect metal roofing without a costly mistake?

Made-to-measure tile-effect metal roofing requires an accurate description of the roof slopes. The roof area alone is not enough. You need lengths, laying directions and decisions on details at the eaves and ridge. It is also worth establishing who is responsible for the final cutting plan. One short conversation before production is often cheaper than later reworking an entire batch of sheets. The measurement should cover the actual dimensions of the slopes, their diagonals and the position of the edges. The planned eaves and the termination at the ridge must be taken into account. The length of the structural element does not have to correspond to the length of the ordered sheet. Chimneys, windows and any changes in plane are also important.

By |2026-11-14T10:54:26+01:002024-03-27|Building academy|Comments Off on How do you order made-to-measure tile-effect metal roofing without a costly mistake?

Specifying a roof covering for a hall or industrial building

How the building is used should determine the choice of roof covering for an industrial hall. An unheated shelter and a temperature-controlled warehouse have different needs. Options include trapezoidal sheeting, insulated roof panels and systems on structural decking. First assess loads, thermal insulation, moisture and fire requirements; consider the price of the covering later. In an open shelter, protection against precipitation matters most, but the risk of moisture condensing under the sheeting must also be examined. A heated workshop or warehouse requires the whole envelope to be designed, including joints and the sealing layer.

By |2026-11-14T20:36:13+01:002024-03-22|Building academy|Comments Off on Specifying a roof covering for a hall or industrial building

When does composite cladding work in a livestock building?

In a cowshed, pigsty or poultry house, the inner roof surface operates in a demanding environment. Moisture, deposits and compounds produced during rearing act on it. One solution is a panel with composite cladding on the inside. This does not mean full resistance to every substance. The conditions of use must be matched to the specific building. An example roof panel has a profiled steel outer cladding, a PUR or PIR core and a flat inner cladding. The latter is made of polyester resin reinforced with glass fibre. The fibre reinforces a thin surface layer. It is not a mineral wool core.

By |2026-11-14T13:14:07+01:002024-03-19|Building academy|Comments Off on When does composite cladding work in a livestock building?

Planning a reroofing project to address the condition of the whole roof

It is worth planning the roof covering replacement so that the renovation addresses the causes of problems across the whole roof, not just the new surface. Before deciding the scope, the condition of the structure and the layers beneath the covering must be checked, along with the locations of leaks and the timber at the eaves, chimneys and valleys. The choice of material and the works should follow the identified condition, the roof pitch and the substrate requirements. If access from inside is limited, some information will only be obtained after opening up, so the schedule and inspections should be adapted to the stages.

By |2026-11-15T00:24:49+01:002024-03-13|Building academy|Comments Off on Planning a reroofing project to address the condition of the whole roof

Can termPIR AL GK solve a cold wall problem?

termPIR AL GK combines internal insulation with a facing board for finishing the wall. The composite consists of a PIR core with gas-tight facings on both sides and a 12.5 mm thick plasterboard. Before installation, it must be established whether the coldness of the wall results from insufficient insulation, a thermal bridge or an air leak. Adding the board can increase the thermal resistance of the covered section, but it does not automatically seal the perimeter and the joints. The condition of the masonry remaining beneath the composite is also important. In this guide, we separate the PIR thickness from the plasterboard, check moisture and the continuity of the layers, and set out the scope of work needed to complete the whole detail.

By |2026-11-16T03:25:18+01:002024-03-08|Building academy|Comments Off on Can termPIR AL GK solve a cold wall problem?
Back to top