Designing a roof without an eaves overhang

A roof without an eaves overhang is a sensible choice when it follows from a considered design rather than a hasty shortening of existing rafters. We advise checking that the insulation layers, drainage and ventilation are integrated with one another, and that access for cleaning and inspecting hidden elements has been provided. The choice between a visible and a concealed gutter should depend on ease of servicing and the consequences of a possible failure. Final design decisions are left to the designer, who will assess the detail as a whole.

By |2026-11-15T00:22:30+01:002023-11-08|Building academy|Comments Off on Designing a roof without an eaves overhang

How much will you pay for 100 metres of steel sheet and what area will it cover?

The phrase “100 metres of steel sheet” needs clarification. It can mean the total length of the sheets or the coverage area. The results will differ. To calculate the price, you need the coverage width, the length and the number of pieces. The example below separates the units. It also shows why material for a roof with an area of 100 m² may cost differently from 100 linear metres of steel sheet. A linear metre is a 1 m length at a specific sheet width. When the coverage width is 1.10 m, one linear metre gives 1.10 m² of coverage. At a width of 1.035 m, it gives 1.035 m². Without specifying the profile, a price per linear metre is incomplete.

By |2026-11-14T13:14:36+01:002023-10-18|Building academy|Comments Off on How much will you pay for 100 metres of steel sheet and what area will it cover?

Winter roof maintenance: which checks help prevent damage?

Before winter arrives, the owner should establish which drainage and fixing faults need repairing ahead of frost rather than leaving them until later. It is worth checking that gutters and downpipes flow freely, the condition of flashings and the completeness of snow guards, and removing leftovers from earlier work. For sandwich panels, the tightness of joints and the condition of the core are assessed. A fault list makes it easier to plan actions before the weather hampers access and the use of repair materials.

By |2026-11-15T04:21:16+01:002023-10-08|Building academy|Comments Off on Winter roof maintenance: which checks help prevent damage?

Trapezoidal steel sheet or tile-effect metal roofing: which look and way of working suits the house?

Trapezoidal steel sheet gives a simple rhythm of longitudinal ribs. Tile-effect metal roofing also introduces transverse profiles and division into rows. Both coverings can suit a contemporary house. The choice should, however, take into account the roof geometry and technical requirements. Assess the whole system, because a similar colour does not mean similar material behaviour. Trapezoidal sheet emphasises the direction of fall. On a simple barn or small pavilion it can give a calm, uniform plane. High ribs draw the shadow more distinctly. A low profile looks more subtle, but its selection must follow from load-bearing capacity. Do not reduce the height just so that the roof resembles smooth sheet metal.

By |2026-11-14T10:54:20+01:002023-10-05|Building academy|Comments Off on Trapezoidal steel sheet or tile-effect metal roofing: which look and way of working suits the house?

How to assess the price of a thin 40 mm wall panel?

A thin panel can be advantageous in a suitable application. However, it should not replace a thicker variant simply because it costs less. The price of a 40 mm wall sandwich panel depends on the core, the steel sheets, the coating and the batch. The coverage and accessories must also be checked. The figures below are for calculation purposes and are not a current quote. A 40 mm panel may be considered where the thermal requirements and other conditions permit its use. This applies to certain claddings or internal partitions. It does not mean automatic suitability for every unheated building. The loads, fire and environment must still be checked.

By |2026-11-14T13:13:33+01:002023-09-11|Building academy|Comments Off on How to assess the price of a thin 40 mm wall panel?

How to check a roofer’s skills and experience

In Poland, a roofer's quality is shown above all by how they think, not by the price per square metre alone. Check whether they can explain how the roof will be built, know the instructions for the chosen system and recognise problems that need a structural engineer. When discussing a team, ask about projects using a material similar to the one planned, because installing modular metal tiles differs from laying long trapezoidal sheets. Request a discussion of details and documentation of the stages that will later be covered. Experience matters, but it must relate to comparable work.

By |2026-11-14T17:11:20+01:002023-08-19|Building academy|Comments Off on How to check a roofer’s skills and experience

Trapezoidal steel sheet for cladding and for load-bearing applications

Trapezoidal sheet serves different functions in a building, so before choosing, establish whether the sheet is to close the partition and protect against weather or carry loads between supports. Check the support layout, loads, thickness, steel grade and product version, not just the trapezoid height. A cladding profile must also carry loads, mainly from wind. The label “structural” does not remove the need for calculations, and a similar shape does not make sheets interchangeable.

By |2026-11-15T00:24:32+01:002023-08-18|Building academy|Comments Off on Trapezoidal steel sheet for cladding and for load-bearing applications

Tracing a leak in sheet metal roofing and making it watertight

First identify the source of the leak before you start sealing. Water seen on the ceiling may enter under the covering elsewhere, so check flashings, sheet joints, fixings and the possibility of condensation. A universal sealant applied to a random gap usually does not remove the cause. Protect the interior, and if water is near electrical installation, ensure the circuit is assessed and protected. Do not go onto a wet roof surface during rainfall. Record when dampness appears and take photos from inside. Leave the choice of repair until the problem has been identified.

By |2026-11-14T20:37:02+01:002023-07-23|Building academy|Comments Off on Tracing a leak in sheet metal roofing and making it watertight

Planning concealed gutters on a sheet metal roof

In Poland, concealed gutters can be used on a metal roof provided the entire eaves detail is designed together with the covering and drainage. Readers should check the system section: the position of the gutter relative to the metal edge, the path of water from the slope and any outflow along the underlay. A clear drawing should also show the location of joints and access for cleaning. The cover alone does not determine whether the solution is correct, so leave the layout of the detail to the designer.

By |2026-11-14T17:11:06+01:002023-06-20|Building academy|Comments Off on Planning concealed gutters on a sheet metal roof

How to read reviews of a supplier of panels, sheets and steel halls?

Reviews from other customers can suggest what to ask before purchase. However, they do not replace the material specification or the contract. It is worth separating the assessment of transport from the assessment of the panel and the crew's work. These matters are often lumped into one comment. The most useful is a description of a specific event, its circumstances and how it was resolved. Check whether the author bought only materials, ordered transport, or commissioned the construction of the entire hall. These are different scopes of responsibility. A comment about fast delivery of steel sheet does not describe the quality of installation. A review of a delayed build does not automatically explain the condition of the panels delivered.

By |2026-11-14T13:14:18+01:002023-06-16|Building academy|Comments Off on How to read reviews of a supplier of panels, sheets and steel halls?
Back to top