The picket is the infill. What really holds the fence together?

On a finished fence, the pickets are the most visible part. They create the colour and rhythm of the entire fence. For this reason, it is easy to attribute to them tasks that are actually performed by other parts. In reality, steel pickets are usually the infill of a prepared structure. Understanding this difference helps when buying, renovating and assessing the contractor's work. It also helps avoid modifications based solely on appearance. Metal fence pickets define the gap and the character of the bay. They can have different widths, end shapes and finishes. Their profiling gives them the rigidity needed for their proper use. This does not, however, mean they can be used as arbitrary load-bearing elements. Every product has a defined purpose.

2026-11-15T19:35:07+01:00

How to choose an insulated wall panel with a mineral wool core for the actual building conditions?

The best panel with mineral wool is one that meets the requirements of the specific wall. For one building, fire resistance will be most important. For another, heating, appearance or the weight of the elements matter. Choosing the thickness alone does not settle the matter. You need to compare the whole panel, its fixing and the application conditions specified for the selected variant. Start with the building's function, the internal temperature and the nature of the work. A dry warehouse is assessed differently from a room that is regularly washed. Record the wall dimensions, openings and the expected panel layout. Determine whether the partition has fire and acoustic requirements. Only this information forms the basis for selection.

2026-11-14T10:54:43+01:00

How to estimate labour for installing sheet metal roofing

In Poland, the labour cost of laying sheet metal on a roof depends primarily on the roof's shape and the scope of work, not solely on the number of square metres of slope. Before comparing quotes, check whether the price covers substrate preparation, membrane, counter-battens and battens, or only the laying of sheets, and whether valleys, ridges, chimney flashings and gutter installation are priced separately. For a renovation, add removal of the old covering, protection of the building and waste disposal. Without this list, a rate per metre says little.

2026-11-14T17:11:18+01:00

How design, prefabrication and energy planning fit together in modern construction

In Poland, modern construction relies on precise design, prefabrication and better energy control rather than on a product's name alone. Readers should check whether the claimed benefit follows from current property documents and suits the building's function. A digital model and drawings help establish hole positions, element lengths and connection methods in advance, especially for cut-to-size sheets and sandwich panels. An error discovered after production may mean rework or unnecessary waste. Consistent information passed to all construction participants is as important as the design itself.

2026-11-14T17:10:46+01:00

When does fleece under trapezoidal steel sheet reduce condensation dripping?

Fleece on the underside of the sheet metal can reduce dripping water from condensation. It acts as a temporary buffer. It absorbs some moisture and then must release it. Without conditions for drying, its capacity comes to an end. Therefore, the suitability of sheet metal with fleece is determined by the entire roof assembly and ventilation, not by the presence of the soft layer under the sheet alone. Moist air can come into contact with a surface colder than the dew point temperature. Then vapour condenses on the underside of the covering. The phenomenon can also occur without precipitation. Not every trace of water under the roof therefore means a hole or a defective lap.

2026-11-14T13:14:22+01:00

Cold spots in a PIR-insulated roof: checking insulation continuity

A well-insulated roof field can adjoin a weak detail at the eaves or at a window. PIR boards do not rule out such a situation. The diagnosis should distinguish a thermal bridge from air leakage and moisture. Only then can the necessary repair be selected. PIR boards laid above the rafters form a layer that also covers the wooden structural elements. This can reduce their contribution to the flow of heat through the roof. Recurring cooler strips may show the run of the structure. Assessing them requires knowing whether the PIR lies above the rafters, between them or below them. It is worth comparing the run of the cooler strips with the rafter spacing. If the insulation is located between them, the timber takes part in a different path of heat flow.

2026-11-16T03:15:58+01:00

Does the Powerroof tongue-and-groove joint eliminate every thermal bridge?

The tongue-and-groove joint on all four edges of Powerroof brings adjacent PIR boards together in a way that facilitates continuous contact, but it does not eliminate all thermal bridges in a pitched roof. The edge profile alone does not determine the behaviour at the eaves, the ridge or at the points where fasteners penetrate the above-rafter insulation layer. Recticel Powerroof is a PIR board with aluminium facing, intended for above-rafter thermal insulation; its position above the rafters must be read from the course of the layer and the method of fixing the covering, not from the appearance of the joined boards alone. Continuous insulation does not, after all, take over the function of the elements that transfer forces from the covering to the timber structure.

2026-11-16T03:25:36+01:00

Roof renovation on a tight budget: where cutting costs is a mistake

A limited budget requires setting priorities, not randomly crossing items off the cost estimate. The cheapest quote may cover fewer works than are needed for a durable repair. Corrugated fibre cement sheets should be priced together with the structure, fixings and finishes. Asbestos-free fibre cement can be part of a sensible renovation if the scope matches the condition of the building. It is worth saving on unnecessary works and good organisation while retaining the required roof functions. A leak may come from flashings, fixings, a damaged sheet or a blocked gutter. Moisture under the roof slope may also result from condensation. Each cause requires a different action. Spending money on material before an inspection risks repairing the wrong place.

2026-11-15T19:36:34+01:00

Fibre cement roofing on an extension: connecting to the existing house

The roof of an extension often has a simple shape, but the junction with the existing building is difficult. Water runs off close to the wall, and the new structure may behave differently from the old one. Fibre cement sheets must be matched to the whole system, not just to the appearance of the house. Asbestos-free fibre cement can be considered as a covering if the pitch, the support and the details meet the requirements of the given system. The place where the new roof slope ends usually requires the most attention. The level of the windows, the eaves of the old house and the height of the new wall limit the shape of the roof. The actual pitch, the length of the run-off and the space for the layers must be checked. It is not enough to choose the thinnest covering if there is insufficient height for the thermal insulation or for the required detail.

2026-11-16T03:14:20+01:00

Is the old roof structure suitable for new corrugated roofing?

Replacing the sheets does not mean that the entire roof structure always has to be replaced. Nor does it justify leaving it without inspection. Corrugated fibre cement sheets require a structure suited to the weight, loads and method of fixing. Asbestos-free fibre cement can be considered for a renovated building only after assessing the existing roof. The key question is whether the old elements and connections will safely perform their function in the new arrangement. It is worth checking whether the roof was raised, extended or repaired after damage. Past alterations may not be visible on the original design. Periods of leakage, dampness and major internal alterations should be noted. Removing a wall or adding equipment may affect the structure.

2026-11-15T19:36:16+01:00
Back to top