Building academy
The Izoprofil.org building academy explains decisions made during construction and refurbishment. The articles start with the materials themselves, including sandwich panels, PIR insulation boards and profiled sheet metal. Learn the terms used in product descriptions and how several properties affect a complete assembly. Topics include thermal insulation, joints, moisture protection, roof coverings and purchasing. Each article includes a summary and contents to help you find the relevant detail. Use the guides alongside the drawings and product documentation for your own project.
How to budget a sandwich panel hall from ground to cladding?
Sandwich panels are only part of the expenditure on a hall. The ground must be prepared, along with foundations, structure and installations. Gates and work organisation are additional. The price per m² of a hall only makes sense once the scope is defined. The model below shows how to build a budget. The amounts adopted are an arithmetic exercise, not a market quote. Describe the hall's function, dimensions and usable height. State the number of gates, required temperatures and planned installations. In a warehouse, racking and forklift traffic may be important. In a workshop, other floor loads and ventilation needs come into play.
Can EPS be bonded to a wet wall?
Bonding EPS to a wet wall should not be a way of hiding moisture. First, its source must be established and the requirements of the adhesive and of the thermal insulation system checked. Construction moisture is assessed differently from a permanent leak or rising damp from the ground. The timing of the work follows from the condition of the substrate, from measurements and from drying conditions, not from the calendar alone. A new wall may contain water originating from mortars and wet trades. An old building is often damp because of a leaking roof, flashings, plumbing or the lack of effective insulation against the ground. A rain stain and the uniform moisture of a fresh wall require different treatment. Before insulating, the mechanism must be identified, because the method of repair depends on it.
Planning concealed gutters on a sheet metal roof
In Poland, concealed gutters can be used on a metal roof provided the entire eaves detail is designed together with the covering and drainage. Readers should check the system section: the position of the gutter relative to the metal edge, the path of water from the slope and any outflow along the underlay. A clear drawing should also show the location of joints and access for cleaning. The cover alone does not determine whether the solution is correct, so leave the layout of the detail to the designer.
How do you calculate the cost of a hall made from panels when the same floor area comes in different shapes?
Two halls with the same floor area may require different quantities of panels. Perimeter, height, roof and openings all count. An even greater difference arises between one building and several small ones. The estimate starts with geometry and function. The price per square metre of panel is only one component of the whole investment. Panels are bought for walls and roof, not for the floor plan. A tall building has a larger wall area than a low one with the same footprint. An elongated structure may have a larger perimeter than a compact one. On top of that come gables, openings and the way the roof slopes are finished. A single EUR/m² of floor area figure hides these differences.
How to read reviews of a supplier of panels, sheets and steel halls?
Reviews from other customers can suggest what to ask before purchase. However, they do not replace the material specification or the contract. It is worth separating the assessment of transport from the assessment of the panel and the crew's work. These matters are often lumped into one comment. The most useful is a description of a specific event, its circumstances and how it was resolved. Check whether the author bought only materials, ordered transport, or commissioned the construction of the entire hall. These are different scopes of responsibility. A comment about fast delivery of steel sheet does not describe the quality of installation. A review of a delayed build does not automatically explain the condition of the panels delivered.
What protects metal fence pickets beneath the colour layer?
The colour of a fence is visible immediately. How metal fence pickets will age is also determined by the layers hidden beneath the paint. It is worth distinguishing between them. The term 'coated sheet' alone does not describe the whole material. A good specification should state the substrate, the metallic protection and the finish on both sides. This makes it easier to compare pickets that look almost identical in photographs. The core of a typical sheet-metal picket is steel. A thin strip is formed from it and given a specific cross-section. Folded edges and pressings change how the element behaves when it bends. That is why the width and thickness of the material alone are not enough to assess rigidity. The geometry of the finished picket and the way it is supported also matter.






