Building academy
The Izoprofil.org building academy explains decisions made during construction and refurbishment. The articles start with the materials themselves, including sandwich panels, PIR insulation boards and profiled sheet metal. Learn the terms used in product descriptions and how several properties affect a complete assembly. Topics include thermal insulation, joints, moisture protection, roof coverings and purchasing. Each article includes a summary and contents to help you find the relevant detail. Use the guides alongside the drawings and product documentation for your own project.
Does an east-west photovoltaic roof make sense?
A roof does not need a single slope facing south for photovoltaics to be worth considering. An east-west layout can spread production across different hours of the day. This does not automatically mean a higher annual yield or better profitability. What matters is the building geometry, shading and the pattern of energy consumption. In an integrated system, both orientations can be incorporated into a coherent roofing concept. The eastern part of the roof benefits from different hours of sunlight than the western part. Instead of one strong midday peak, a broader distribution of system operation can be achieved. The details depend on the pitch and site conditions. Tall trees to the east or a neighbouring building to the west can significantly change the expected effect.
Checking the performance of second-grade 100 mm wall panels
The term “second grade” does not say which properties of the 100 mm panel have remained unchanged. First, the reason for the price reduction and the condition of the specific batch must be established. A difference in shade is assessed differently from damage to the core or the joint. The material should be considered under the conditions in which it will perform over the coming years. On a façade, a slight difference in gloss may only become visible in side light. A dent may cast a shadow depending on the time of day. If such an appearance is acceptable, the condition of the surface protection must still be checked. A scratch confined to the top layer is a different situation from deep damage exposing the metal. Do not assess both cases with the single word “blemish”.
PIR or mineral wool in a sandwich panel: what to choose for a given building?
There is no single core that is best for every building. PIR can achieve a low U-value at a smaller thickness. Mineral wool offers different possibilities for fire reaction and classified partitions. However, the choice is determined by the properties of the complete panel. The facings, joints and method of support also matter. First establish the building's function and the requirements that cannot be omitted. This may be a specific partition class, a thermal target or an environmental condition. Only then compare weight and cost. A ranking of cores without information on the application is of little use. The same panel may suit one pavilion and not another.
Choosing a garden fence: when do metal pickets suit the site?
Begin by clarifying what the fence is for: mainly separating the property, screening the garden or controlling entry? This decision shapes the bay spacing and the degree of openness. Metal pickets let you adjust the gaps and create a visually light line, but posts, rails, fixings, the gate and wind conditions must be considered. Before buying, draw the whole run to avoid a cramped section near the gate. Leave the assessment of structure and foundations to the designer, in line with local conditions.
Is a 60 mm wall panel with mineral wool enough, and what about the 40 mm version?
The 60 mm panel with mineral wool is available in selected wall families. However, it should not be treated as a solution for every small building. Insulation performance, load-bearing capacity and fire requirements must be checked. The 40 mm offer may relate to a different core. Before comparing prices, it is worth confirming which product is actually being sold. No. The thickness range depends on the panel family. In some catalogues, wall panels with mineral wool start at 60 mm, in others at 80 mm or more. A single availability table for the whole market should not be created. The dimension must be confirmed for the specific product, joint and facings.
Ventilation tiles: when are they needed and where should they go?
A ventilation tile may be needed on a long roof slope and at obstacles that interrupt the duct under the covering. It is worth checking whether the air path from the eaves to the upper part of the slope remains continuous and whether the openings are blocked. Its layout depends on the roof construction and system requirements, so the decision on number and position is left to the designer or roofer. This element supports drying of the space under the covering, not room ventilation. It must also be distinguished from a transition tile with a flue.






