Building academy2026-11-15T19:17:48+01:00

Choose a product group

Metal roofing

Blachy trapezowe — ilustracja kategorii

Sandwich panels

Płyty warstwowe — ilustracja kategorii

PIR insulation boards

Płyta izolacyjna PIR z cienką folią — ilustracja kategorii

XPS

Płyty XPS — ilustracja kategorii

Accessories

Wkręty i łączniki — ilustracja kategorii

Fencing

Sztachety metalowe — ilustracja kategorii

Building academy

The Izoprofil.org building academy explains decisions made during construction and refurbishment. The articles start with the materials themselves, including sandwich panels, PIR insulation boards and profiled sheet metal. Learn the terms used in product descriptions and how several properties affect a complete assembly. Topics include thermal insulation, joints, moisture protection, roof coverings and purchasing. Each article includes a summary and contents to help you find the relevant detail. Use the guides alongside the drawings and product documentation for your own project.

Safe removal of moss and algae from metal roof tiles

Safely removing moss and green film from coated steel roofing means gentle cleaning matched to the type of soiling and the condition of the coating, not merely a quick reveal of the sheet colour. First assess whether it is moss, a thin film of algae or dirt-bound deposit, and inspect the coating for flaking, scratches and corrosion. Check for water pooling and clear drainage, since washing alone will not remove the cause. Check the cleaning instructions for the specific coating before choosing a product. If the work requires access at height, agree on a cleaning method and safe access with the contractor.

Why does a photovoltaic roof produce different power on sunny frosty days and in summer heat?

Strong sunlight is not the only factor determining the instantaneous output of a photovoltaic system. Cell temperature also matters. In typical silicon modules, cooler operation favours output at the same amount of light. This does not mean, however, that winter will deliver greater annual production than summer. Shorter days, the sun's angle, snow and weather can outweigh the benefit of lower temperature. Air temperature in the shade is not the temperature of the active roof surface. Cells absorb radiation and heat up during operation. Their conditions also depend on wind and heat dissipation through the covering. A summer ambient temperature reading alone therefore does not allow you to determine how the photovoltaic layer is performing.

Which roof coverings can keep the weight down?

When choosing a lightweight roof covering, the key is to compare complete roof systems rather than the sheets alone. Metal roof tiles and trapezoidal sheets have low mass, which eases transport and can help during renovation. You should check whether the offer states the mass of the whole system, including battens, membranes and insulation, and whether both proposals use the same measurement boundary. It is also worth establishing which profile, steel thickness and support spacing are assumed, because stiffness depends on the entire assembly, not just the material name.

What thickness of PIR can replace a layer of polystyrene?

Replacing polystyrene with PIR starts with comparing thermal resistance. There is no single fixed thickness conversion factor for all products. Two λ values and a clear comparison objective are needed. Equal layer resistance does not yet mean that the materials can be freely interchanged in a façade or internal insulation system. PIR comes with different facings and declared properties. λ may also depend on the thickness range. Polystyrene is also not a single variant with a common parameter. Therefore, the statement “half the thickness is always enough” omits the data that determine the result. Specific materials must be compared.

Sandwich panels and steel sections: their roles in a building enclosure

A roof or wall made of insulated sandwich panels looks like a single continuous surface once installed. Beneath it, however, various elements are at work. The panel transfers loads to the supports, and cold-formed profiles carry them onward to the main structure. Z-sections, C-sections, sigmas and omegas can perform different functions in this system. A sound connection between the envelope and the structure requires a clear division of tasks. It is not enough to buy a strong panel and a strong profile separately. The panel's span depends on its type, thickness, facings and load. The structural scheme also matters. A panel supported on two supports is not assessed in the same way as a continuous panel over several bays. That is why the spacing of purlins or rails is not chosen solely according to a convenient hall module. The documentation for the selected envelope must be checked.

Choosing a contemporary roof that will still suit your house in years to come

The final roofing decision should be based on compatibility with the house's form and technical requirements, not solely on catalogue photographs. Check whether the profile and colour suit the building's proportions and whether the solution matches the roof pitch, structure and conditions of use. Assess samples of the façade, joinery and covering outdoors in different light, as a screen does not reflect the material's colour. Bear in mind that the profile choice affects appearance but must also meet technical requirements. Leave the design decision to the designer.

Back to top