Building academy2026-11-15T19:17:48+01:00

Choose a product group

Metal roofing

Blachy trapezowe — ilustracja kategorii

Sandwich panels

Płyty warstwowe — ilustracja kategorii

PIR insulation boards

Płyta izolacyjna PIR z cienką folią — ilustracja kategorii

XPS

Płyty XPS — ilustracja kategorii

Accessories

Wkręty i łączniki — ilustracja kategorii

Fencing

Sztachety metalowe — ilustracja kategorii

Building academy

The Izoprofil.org building academy explains decisions made during construction and refurbishment. The articles start with the materials themselves, including sandwich panels, PIR insulation boards and profiled sheet metal. Learn the terms used in product descriptions and how several properties affect a complete assembly. Topics include thermal insulation, joints, moisture protection, roof coverings and purchasing. Each article includes a summary and contents to help you find the relevant detail. Use the guides alongside the drawings and product documentation for your own project.

Metal roof tiles on site: taking delivery, storing sheets and drying a wet pack

Before signing for a delivery of tile-effect sheets, compare the pack labels with your order. Do the sheet lengths, profile, finish and quantities tally? Look for dents in the packaging, signs that the sheets have slipped, and evidence of moisture. Photograph any damage before unloading, while it is still possible to show how the pack arrived. Choose a handling method suited to its weight and dimensions and a dry, ventilated storage space that meets the manufacturer’s instructions. An undamaged outer sheet can hide a wet or damaged sheet underneath.

Leaks in an old roof: why a water stain may not reveal the defect

A wet patch under the roof marks the place where the water became visible. It does not have to mark the place where it entered. It may flow along the structure, the underlay or the underside of the covering. Fibre cement sheets therefore require an assessment of the entire path of the moisture. Asbestos-free fibre cement does not rule out flashing errors or condensation. A good diagnosis begins with observing the conditions in which the symptom appears and with identifying the roof's composition. It is worth noting whether the leak occurred during steady rain, wind-driven precipitation or during a thaw. The wind direction and the time between precipitation and the first stain are important. Information about the temperature and how the interior is used will also be helpful.

Roofing defects: finding the cause and documenting a complaint

When reporting a roof problem, start by separating the visible symptom from its source. A crack, colour change or leak may come from the material, transport, installation or use. In your report, state the facts and where the issue appears. Delivery documents, photos of the work stages and product data help; without them, responsibility and the right repair are hard to judge. Describe what you observe, when it began and under what conditions. For a leak, note the rainfall circumstances; for discolouration, say whether it covers the whole slope, one sheet or the chimney area. A general claim of a defect gives the contractor or supplier too little to assess.

Installing cut-to-length and modular tile-effect metal sheets

In Poland, correct installation of cut and modular metal roof tiles depends on matching the delivery to the order and checking the profile, coating, colour and lengths, as well as the condition of corners and edges. It is worth comparing the delivery with the order and assessing whether long sheets are supported during handling and small panels have not been scratched. Before covering, the roof truss geometry and support positions should also be verified, because battens must match the module of the specific metal roof tile. Design decisions are left to the designer.

Can galvanised sheet-metal fence pickets rust?

Galvanised steel sheet is a common base material for metal fence pickets. An additional colour coating helps protect the material and gives it its appearance. However, this does not mean resistance to every type of damage and every environment. So the question about rust is worth putting more precisely. What protects metal pickets, what can impair the protection, and when does a brown mark require closer inspection? The zinc layer separates the steel from its surroundings. It can also protect it electrochemically in the vicinity of a small exposed area of the substrate. This is one of the reasons galvanised steel sheets are used. It does not follow that an arbitrarily damaged surface will remain permanently free from corrosion. The condition of the coating and the exposure conditions still matter.

Corrosion in farm buildings: choosing protection for the conditions inside

Two steel halls that look similar can operate in completely different conditions. A dry equipment store differs from a room with a lot of moisture and dirt. That is why anti-corrosion protection is not chosen by colour alone. In an agricultural hall, you need to identify the environment, the cleaning method and the areas exposed to damage. The protection must match what will actually happen in the building. The designer and supplier should know the intended use of the steel hall. The expected humidity, contact with water, contaminants and the agents used are important. An open, wind-exposed section is assessed differently from a heated interior. The term agro hall alone does not provide enough information to select protection for the steel structure.

Back to top