+48 500 409 109

Designing a modern commercial building with a metal roof

The function of the company building should guide the choice of roof covering, not its appearance. Before specifying coatings and the layer build-up, give the designer details of the internal conditions: temperature, humidity and how work is carried out. A storage hall without heating has different requirements from a heated workshop or office. Check that the solution suits the span, installations and acoustics. Remember drainage and safe access for inspections. Quality depends on a complete design and careful details, so compare offers for the whole system.

2026-11-14T20:35:30+01:00
Read More

Choosing roof insulation: PIR boards, mineral wool or EPS?

The choice of roof insulation material depends primarily on the roof construction, the available thickness and the working conditions. PIR provides high thermal resistance in a thin layer, mineral wool fits well into the space between rafters, and suitably selected EPS is widely used in flat roofs. Before purchase, check the product's intended use, declared lambda, reaction to fire and mechanical and moisture-related parameters. Also establish the layer build-up and ventilation method, because no material can replace a correct design and airtight execution.

2026-11-15T00:24:47+01:00
Read More

Safe snow clearance on sheet metal roofs

Safe snow removal from a metal roof requires planning the work at height and controlling the load on the structure, not merely judging snow depth from the yard. You should check the snow's mass and distribution, the condition of the covering, and the loads envisaged for the specific structure, because there is no single safe number of centimetres. The task should be carried out by properly prepared people with suitable equipment, protecting both themselves and the metal coating. In case of doubt, a technical assessment is needed, and design decisions are left to the designer.

2026-11-14T20:35:48+01:00
Read More

Is tile-effect metal roofing still a good choice?

In Poland, metal roof tiles remain a solution worth considering if they suit the design and the intended appearance of the house. Before deciding, check whether the chosen model matches the roof pitch, how the details are resolved and what type of coating is used. Cost-effectiveness depends on the whole roof and its later use, not on the sheet price alone. In renovation, the low weight of the covering can be an advantage, but the condition of the trusses and substrate requires assessment. Also compare formats and the full list of items in the quote.

2026-11-14T17:11:24+01:00
Read More

How to compare a metal roofing quotation with other roof coverings

Compare the cost of a metal roof with other coverings only at the level of a finished roof with the same requirements, because the price of material per metre describes only part of the expenses. Check whether the offers include the substrate, cuttings, flashings and labour, and in a renovation also dismantling and structural repairs. Establish the intended use of the attic, the insulation performance and the necessary accessories, so that the comparison does not set a variant with insulation and finishing against one with only the surface material. Divide the estimate into structure, substrate, covering, details, transport and execution to assess where savings actually arise.

2026-11-15T00:21:49+01:00
Read More

Which parts of a roofing job are the roofer’s responsibility?

In Poland, a roofer is primarily responsible for preparing the substrate, installing the layers beneath the covering and laying the surface material, as well as for flashings at the eaves, ridge, chimney and edges. Before signing a contract, it is worth checking the schedule of works: who supplies the material, takes measurements and places the order, and how dismantling and protection of the open building have been agreed. The roof structure is built according to the design, so the roofer should report any problem noticed rather than alter the layout independently. When insulating a loft, the connections between layers must be coordinated to ensure continuity of protection.

2026-11-14T17:09:50+01:00
Read More

How to decide on a roof covering for your home

In Poland, the choice of roof covering should be based on matching the roof shape, pitch and structural load capacity, not on the material's appearance alone. The client should check the design and local rules on the building's appearance, which may specify roof angle, covering type or colour. Then compare the roof pitch with the requirements of the specific system, because the material name alone is not enough — two types of metal roof tile can have different lap rules and different permissible roof geometry. Leave the design of the roof build-up to the designer.

2026-11-14T17:09:36+01:00
Read More

Planning roof access for maintenance: steps, walkways and safe routes

A designated roof route leads to the chimney and to equipment that needs servicing, so walking on the covering itself is reduced. This path should start at a safe entry point and reach every point requiring attention. Steps, platforms and brackets must work with the roof structure, and not every component is suitable for attaching a fall-arrest line. Consider the roof access hatch, the perimeter and the entire course of the route, plus service access where photovoltaics are present. A designer or installer familiar with the system should assess the layout.

2026-11-14T20:36:44+01:00
Read More

Insulating a loft and keeping junctions airtight

Before lining the roof slopes, inspect the junctions at walls, windows, the chimney and service penetrations. Check the roof for leaks, examine the timber, and identify the underlay and the ventilation gaps the roof needs. If insulation is wet, find the source of the water before concealing it behind new boards. Then mark out the boundary of the heated space, the position of the lining framework and the service runs. This lets you follow the insulation line from one junction to the next and spot gaps while they are still accessible.

2026-11-15T04:21:21+01:00
Read More

Is the minimum roof pitch the best angle for photovoltaics?

The minimum pitch permitted for a covering and the angle that favours energy yield are two different pieces of information. The first concerns the conditions under which the roof may be used. The second depends on location, the orientation of the roof slope and the expected production profile. In an integrated system, both requirements must be reconciled. The angle cannot be chosen on the basis of a power table alone, nor can the permissible minimum be treated as a universal recipe. The manufacturer specifies the conditions under which a given covering and its details may be used. The pitch influences, among other things, water drainage and the way joints are made. The permissible range should be checked in the current instructions for the specific system. A figure from the datasheet of another model or a single flashing need not apply to the whole roof.

2026-11-15T19:36:00+01:00
Read More
Back to top