About PiVi

This author has not yet filled in any details.
So far PiVi has created 1504 blog entries.

Replacing an asbestos-cement roof with modern fibre cement sheets: planning the work

Replacing an old roof begins with identifying what is already on the building. A similar sheet shape does not tell you whether the sheets contain asbestos or whether the structure is suitable for further use. New corrugated fibre cement sheets are a separate material choice. Asbestos-free fibre cement can preserve the corrugated character of the roof slope, but it does not remove the need to plan the dismantling, the protection of the building and the correct installation of the new system. First, gather the available documents, the renovation history and clear markings. The composition should not be identified solely by colour or by the age of the building. An old roof may contain elements from different periods. If asbestos is suspected, corners should not be broken off, drilled or samples taken independently.

By |2026-11-15T19:36:14+01:002022-11-21|Building academy|Comments Off on Replacing an asbestos-cement roof with modern fibre cement sheets: planning the work

Why can two similar panels have a different price per square metre?

Two light-coloured panels of the same thickness can differ in construction and scope of application. The price per metre conceals more than the colour of the facing. Before choosing, it is worth comparing the parameters and the quantity of material to purchase. This makes it clear whether the surcharge corresponds to the needs of the building and whether a lower rate offers real savings. Start with the type of core and the thickness of the sheets on both sides. Check the profiling and the method of fixing. A similar surface area does not confirm the same weight or load-bearing capacity. Parameters should be stated for the specific variant covered by the offer.

By |2026-11-14T13:15:32+01:002022-11-13|Building academy|Comments Off on Why can two similar panels have a different price per square metre?

The role of metal roof coverings in contemporary architecture

Begin by defining what the surface must do, not by choosing a colour. Metal roof tiles, T18, T35 and sandwich panels differ in seam construction, load capacity and permitted application, so not every one suits every situation. Appearance depends on proportions, a repeated rhythm and careful details, while the choice should follow interior function, structure and thermal requirements. Set a palette for the whole building form and limit random divisions. Coordinate the sheet layout with the positions of windows, gutters and façade edges at the design stage.

By |2026-11-14T20:35:54+01:002022-11-11|Building academy|Comments Off on The role of metal roof coverings in contemporary architecture

Replacement coverings for an asbestos-cement roof

Replacing an asbestos roof really means two jobs: getting rid of the asbestos safely, then picking a covering that suits the roof's condition. Lightweight metal tile or trapezoidal sheet can be a sensible choice, and in a heated building it is worth considering better insulation too. Base the decision on an inspection of the structure, the pitch and how the roof is used. Breaking, cutting or drilling old sheets releases harmful fibres, so have the removal done by a contractor equipped for this work and for handling the waste. Don't leave broken sheets lying loose on the plot. Beforehand, check the formal requirements and any help your municipality offers.

By |2026-11-14T20:36:27+01:002022-11-10|Building academy|Comments Off on Replacement coverings for an asbestos-cement roof

Anchoring a timber wall plate to a concrete ring beam

Anchoring the wall plate must resist weight, wind uplift and horizontal forces from the roof structure – it is not merely a fixing aid during assembly. The designer specifies the anchor type, spacing and embedment depth, since no single arrangement suits every roof. Before covering, verify compliance with the documentation, the condition of concrete and timber, and that washers and nuts are complete. Remember that even robust anchoring fails where timber is crushed or the concrete edge offers insufficient bearing.

By |2026-11-15T00:22:33+01:002022-11-09|Building academy|Comments Off on Anchoring a timber wall plate to a concrete ring beam

IKO enertherm ALU TG: joints, gaps and airtightness of the building element

With IKO enertherm ALU TG, a gap first requires establishing whether it has arisen at the factory tongue-and-groove joint or at a cut piece without a tongue. These are two different mechanisms: damage to the profile during processing, or the result of a cut which by definition changes the edge. The inspection should cover the width of the last strip, the position of the profiled-edge ends and the conditions under which the symptom appeared. A row plan with the cut edges marked provides a reference for the assessment. Only against this background can a joint defect be distinguished from a characteristic of the cut piece and the scope of the repair be specified.

By |2026-11-16T03:25:48+01:002022-11-08|Building academy|Comments Off on IKO enertherm ALU TG: joints, gaps and airtightness of the building element

Roof insulation: planning the right sequence of work

Insulating a roof requires first establishing which rooms will be heated, not merely choosing an insulation thickness. It is worth checking whether the insulation forms a continuous shield for those rooms and whether its route follows the design. The sequence of work matters because later correcting a covered junction may require dismantling the construction. The drawing should mark the roof connections to walls, wall plates, windows and ceilings, and assess the space for services. The solution should be developed before ordering material.

By |2026-11-14T20:37:06+01:002022-11-05|Building academy|Comments Off on Roof insulation: planning the right sequence of work

How the roof structure carries loads and shapes the roof build-up

In Poland, the roof structure not only supports the covering but also determines the arrangement of all layers, so before the timber is covered it is worth checking whether the completed layout matches the design. Supports, connections, bracing and the condition of the timber are particularly important; changes to the arrangement of timber, supports or connections require verification in the design. Every link in the load path matters, and a strong rafter cross-section is not enough if its bearing or connection fails. Design decisions are left to the designer, who will assess the cooperation of the elements.

By |2026-11-14T17:09:38+01:002022-11-04|Building academy|Comments Off on How the roof structure carries loads and shapes the roof build-up

Where can second-grade trapezoidal sheets be used?

With discounted sheet metal, the description of the specific defect is the most important thing. The same mark may be of little importance for a technical cover and of great importance for a weathertight covering. The profile, coating and connection points must therefore be assessed. Only then is it worth calculating the saving and choosing an application for the available sheets. The term itself does not explain the reason for the price reduction. It may be surface marks, dimensional differences or damage during handling. There are also order remnants sold cheaply without the same category of defects. A clear description of the offered pieces is needed.

By |2026-11-14T17:09:19+01:002022-10-27|Building academy|Comments Off on Where can second-grade trapezoidal sheets be used?

Installing sandwich roof panels: checks from delivery to handover

Before laying sandwich roof panels, decide whether the roof covering will use continuous lengths or pieces joined along their run. This choice shapes the components and the order of work. Ahead of ordering, verify the roof area measurements, the distance between purlins and the lowest pitch the chosen panel allows. Mark where rooflights and service openings will sit. Make sure the supports match the design in position and width, and that their surface is flat and square. Allow room for safe unloading and agree how the panels will be lifted to the roof.

By |2026-11-15T00:23:43+01:002022-10-23|Building academy|Comments Off on Installing sandwich roof panels: checks from delivery to handover
Back to top