About PiVi

This author has not yet filled in any details.
So far PiVi has created 1504 blog entries.

How do you compare two variants of insulated wall panels with a mineral wool core?

Similar thickness and white colour do not mean that two panels with mineral wool are interchangeable. The core density, the sheet thickness and the fixing method may differ. In a small pavilion, these features affect transport, wall performance and cost. It is worth starting the comparison with a single technical table and only then moving on to price. Terms suggesting a basic or reinforced version are offer names. They do not form a common scale for the whole market. One variant may have a lighter core, another different facings or concealed fixing. Without data, it is difficult to tell what change lies behind the name and whether it is needed in a given building.

By |2026-11-14T10:55:33+01:002023-06-09|Building academy|Comments Off on How do you compare two variants of insulated wall panels with a mineral wool core?

Calculating the full cost of a roof, from covering to installation

In Poland, the full cost of a roof must be calculated from the actual roof surface, not from the building's footprint. Check whether the quote separates covering, structure, flashings, drainage and labour, and whether it states the billing unit. For cut sheet metal tiles, the cutting plan is key; for modular ones, the number of panels and the usable area per element. Instead of assuming a single waste percentage, base it on roof geometry and laying direction. Compare prices per square metre of covering, because a sheet also has an overall width.

By |2026-11-14T17:09:34+01:002023-06-07|Building academy|Comments Off on Calculating the full cost of a roof, from covering to installation

What changes when switching to wall panels with 150 and 200 mm mineral wool?

A thicker core can improve the thermal insulation of a mineral wool panel. However, it does not automatically mean the highest fire class or the best solution for every building. With 150 and 200 mm, weight, fixings and details must also be checked. The choice makes sense when the greater thickness helps achieve a specific project goal. In one family of mineral wool wall panels, the 150 mm variant has a Uc of 0.27 W/(m²·K), and the 200 mm variant 0.20. Both have 0.5/0.5 mm facings and a defined core construction. These are data for this family, not values for all panels of these thicknesses. Before comparing, the conformity of the variants must be confirmed.

By |2026-11-14T10:55:16+01:002023-05-25|Building academy|Comments Off on What changes when switching to wall panels with 150 and 200 mm mineral wool?

Choosing a matt or gloss finish for tile-effect roofing

In Poland, the choice between matt and glossy coated steel roofing sheets comes down to the desired visual effect, the parameters of the specific coating and the price of the complete covering. It is worth checking the type of metallic protection, the thickness of the organic coating and the warranty terms, including their scope for appearance and perforation. A sample should be viewed in daylight and compared with the façade, bearing in mind that the difference becomes more pronounced on a large roof slope. The degree of gloss alone does not determine durability – the entire coating system and the service environment govern steel protection.

By |2026-11-14T17:11:08+01:002023-05-07|Building academy|Comments Off on Choosing a matt or gloss finish for tile-effect roofing

Can new corrugated sheets use the existing batten spacing?

Retaining the battens can reduce the cost and time of the renovation. However, it should not be an assumption made before choosing the system. Corrugated fibre cement sheets have specified working lengths and support requirements. Asbestos-free fibre cement will not automatically adapt to the spacing of the previous covering. The geometry, the condition of the structure and the possibility of proper fixing must all be checked at the same time. Only then is it clear which elements are actually worth keeping. The batten spacing may vary at the eaves, ridge and previous repairs. In an older roof, individual rows are also often uneven. The measurement should therefore cover the entire roof slope and special locations. Both the distances and the cross-sections and levels of the supports are important.

By |2026-11-15T19:36:31+01:002023-05-04|Building academy|Comments Off on Can new corrugated sheets use the existing batten spacing?

How to compare roofing materials for your building

The choice of roofing is driven primarily by the building's purpose and the roof geometry, not by the material's appearance alone. It is worth checking whether the offers being compared cover a complete assembly: covering, substrate, fixings and flashings, and for an insulated roof also the insulation and sealing layers. For metal roof tiles, the roof layout and the number of cuts are decisive in choosing between cut-to-size versions and modules. For trapezoidal sheet and sandwich panels, the requirements for the specific profile and application must be established.

By |2026-11-14T20:36:43+01:002023-04-29|Building academy|Comments Off on How to compare roofing materials for your building

How to furnish a loft with sloping ceilings

First, check how much room will actually remain once insulation and built-in elements are fitted – the bare structure may look taller than it will be. Draw a floor plan and sections, marking the height at the knee walls and the areas where you can stand freely, allowing for the thickness of the roof slope and floor layers. Use the highest zones for movement and activities that require standing, and lower ones for storage. Match furniture to windows and services. Remember that decoration will not fix overheating or leaks – you need a dry, insulated roof.

By |2026-11-15T00:21:47+01:002023-04-28|Building academy|Comments Off on How to furnish a loft with sloping ceilings

Hipped roofs on a rectangular plan: how they work and when to use them

A hipped roof has four slopes, usually two trapezoidal and two triangular, which neatly close a simple house form. It is worth checking the actual roof drawing, because four similarly looking planes need not have the same dimensions or pitch angles. When ordering the covering, account for cuts at the corners, a complete set of flashings and the way moisture is drained from the roof layers. Watch out for the slopes at all external walls, which limit where tall furniture can stand. The choice depends on fit with the building form and residents' needs, not on assuming that four slopes mean simpler execution.

By |2026-11-15T00:23:19+01:002023-04-24|Building academy|Comments Off on Hipped roofs on a rectangular plan: how they work and when to use them

How do you choose the thickness of a wall panel with mineral wool from 60 to 200 mm?

The 60–200 mm range offers several options, but it does not form a simple ladder from worse to better material. Thickness must be linked to temperature, fire requirements and construction. A thinner panel may suffice in one application, while a thicker one may be needed in another. First define the wall's task, then compare full variants. Determine whether the building will be heated continuously, periodically or not at all. Describe the humidity and the type of work inside. Check the fire and acoustic requirements. This requires panel spans, installation direction and an opening plan. None of this information is replaced by the floor area alone.

By |2026-11-14T10:55:29+01:002023-04-22|Building academy|Comments Off on How do you choose the thickness of a wall panel with mineral wool from 60 to 200 mm?

When is T14 sufficient for cladding, and when is a higher profile needed?

T14 can look good on a small building. The low profile gives a calm wall pattern and does not dominate over the windows. On a roof, however, more than appearance decides the choice. The section, steel thickness, support and pitch must be checked. Below we show how to assess such a material without attributing to it the capabilities of the whole group of sheets. The number in the designation refers to the height of the corrugation. In the example variant, T14 is 14 mm. It does not describe the thickness of the steel sheet or the purlin spacing. Two similarly named profiles can have a different rib width, coverage and load table. Therefore the name from the offer alone is not enough to substitute one product for another.

By |2026-11-14T10:52:02+01:002023-04-21|Building academy|Comments Off on When is T14 sufficient for cladding, and when is a higher profile needed?
Back to top