About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

Which covering best suits your gable roof?

The best covering for a gable roof depends on the pitch, the building's purpose and the desired appearance, not on the roof shape alone. On simple slopes, consider cut-to-size or modular metal roof tiles, or trapezoidal sheet, while for buildings with other functions a sandwich roof panel may be worth considering. Before ordering, check the actual slope dimensions, diagonals and eave details, as even a simple roof may have construction deviations. It is also worth settling the sheet plan, window and chimney positions and drainage early to avoid later adjustments.

By |2026-11-14T20:35:36+01:002024-08-13|Building academy|Comments Off on Which covering best suits your gable roof?

Small omega sections and hat-section purlins: why they are not interchangeable

The name omega covers profiles with a similar cross-section concept but very different capabilities. A low element under the cladding and a high hat purlin are not equivalent. They differ in dimensions, thickness and the way they are used. It is worth remembering this when cold-formed profiles are chosen from a photo or a short description. A similar outline is not enough to assess the function in a building. An omega profile has a central part set away from two side feet. The feet form surfaces through which the element can be fixed to the substrate or to other parts of the structure. The central section provides spacing and a surface for the next layer. This construction is useful in subframes. It allows the fixing plane to be separated from the plane supporting the cladding.

By |2026-11-15T19:30:42+01:002024-08-10|Building academy|Comments Off on Small omega sections and hat-section purlins: why they are not interchangeable

What does the price of one square metre of trapezoidal steel sheet really include?

The price per square metre of sheet metal is only useful once a few details are added. You need to know the profile, steel thickness, coating and the basis for calculating the area. The same sheet has an overall width and a coverage width. It is also worth separating the purchase of the sheet metal from the installation of the roof. This way, similar amounts stop hiding different scopes. The overall width includes the edges that participate in the overlap. The coverage width shows the module obtained after correct installation. The same basis must be used to compare prices. Otherwise, a lower number may mean a more expensive metre of covered roof area.

By |2026-11-14T13:14:38+01:002024-07-27|Building academy|Comments Off on What does the price of one square metre of trapezoidal steel sheet really include?

Flat roofs: coordinating drainage and waterproofing

A flat roof needs a considered drainage strategy, not just a tight covering. Water must have a defined route to outlets or gutters, while durability depends on sealed waterproofing, suitable thermal insulation and correct details at parapets. Such a roof gives great freedom in shaping the building, but requires careful design and regular checking of drainage. With a low fall, water flows more slowly, so minor unevenness in the substrate matters more. The fall can be achieved within the structure or through the choice of layers; it depends on the covering system and drainage design.

By |2026-11-15T00:23:24+01:002024-07-20|Building academy|Comments Off on Flat roofs: coordinating drainage and waterproofing

Preparing the site for safe re-roofing work

Before you strip the old covering, plan the whole process. Inspect the structure and the layers hidden beneath the sheets, because what is visible on the roof does not reflect the condition of battens, timber or connections. Establish which formalities are needed and how waste will be managed. The new metal sheeting must suit the roof, and the crew should have safe access and a clearly agreed scope of work. Remember to protect the interior from the weather and provide temporary drainage.

By |2026-11-14T20:35:51+01:002024-07-14|Building academy|Comments Off on Preparing the site for safe re-roofing work

Replacing individual sheets or the whole roof? Decision criteria

A single crack does not necessarily mean the whole roof slope must be replaced. However, several similar defects may point to a problem that goes beyond a single sheet. Corrugated fibre cement sheets should be assessed together with their fixings and the supporting structure. Asbestos-free fibre cement makes local repair worth considering, provided compatible components are available and the cause of the fault is known. The decision should be based on an inspection and on the cost of a durable solution, not solely on the number of visible cracks. In an old building, the name used by the owner does not always confirm the composition of the covering. It is also possible that only some sheets were replaced. If asbestos is suspected, do not begin by drilling, cutting or removing a fragment on a trial basis.

By |2026-11-15T19:36:29+01:002024-06-22|Building academy|Comments Off on Replacing individual sheets or the whole roof? Decision criteria

Is it better to lay wall panels horizontally or vertically?

The laying direction of the panels affects the appearance of the wall, but the decision is also technical. It changes the arrangement of supports, terminations and the way elements are lifted. In a small pavilion it can determine the number of cuts. There is no single better direction for every building. The panel layout must be compared with the structure and the arrangement of openings. Horizontal bands emphasise the length of the building. Vertical divisions accentuate its height. The module width and surface profiling also matter. Subtle pressings may look different in side light, even with an identical colour.

By |2026-11-14T13:14:57+01:002024-06-07|Building academy|Comments Off on Is it better to lay wall panels horizontally or vertically?

Can trapezoidal roofing sheets complement a traditional house?

Trapezoidal sheeting works well not only on halls and shelters but also on a traditional house roof. To achieve a coherent look, ensure proper proportions, careful finishing of the eaves and edges, and compare T18 and T35 profiles on a sample and in the design. The appearance choice should be linked to an assessment of the structure and covering requirements. A lower profile appears more subdued, while a higher one accentuates the technical pattern. Perception is also influenced by roof size and viewing distance.

By |2026-11-14T20:35:33+01:002024-06-06|Building academy|Comments Off on Can trapezoidal roofing sheets complement a traditional house?

What role does the aluminium facing play in internal insulation?

Foil-faced PIR board can reduce the thickness of insulation required. Its facing also affects water vapour transmission. This matters for internal insulation, but it does not automatically permit any wall build-up. An assessment of the masonry, moisture and continuity of seals is needed. Simply bonding the boards does not close the matter. The new layer restricts heat flow from the interior to the existing wall. The room surface may become warmer, and the masonry behind the insulation cooler. Drying conditions and the temperature distribution change. Internal insulation therefore requires assessment of the whole system. It is not merely transferring an external wall solution to the other side.

By |2026-11-14T10:55:48+01:002024-05-23|Building academy|Comments Off on What role does the aluminium facing play in internal insulation?

Are metal fence pickets really maintenance-free?

A factory finish, no splinters and no need for impregnation are convenient features of a metal fence. On that basis it is easy to assume that once installed it needs no further attention. That is too far-reaching a conclusion. Metal fence pickets require less of the other work than untreated wood, but they are still a product used outdoors. It is worth knowing what lies behind the promise of easy maintenance. Pickets made of coated steel sheet are supplied with a finished surface. There is no need to apply colour yourself before the first installation. They also do not require the treatments typical of untreated wood. This is a real advantage, especially with a long fence. It saves the material preparation stage and makes it easier to achieve a consistent appearance.

By |2026-11-15T19:34:39+01:002024-05-21|Building academy|Comments Off on Are metal fence pickets really maintenance-free?
Back to top