+48 500 409 109

About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

Polish VAT on roof coverings and roof renovation work

In Poland, a customer buying roofing sheets, tiles or insulation without installation generally pays 23% VAT. If a contractor supplies the materials as part of a roof renovation, eligibility for the 8% rate depends in part on the work covered by the contract, the type of building and its usable floor area. To compare quotations, establish what each contractor will supply, fit and take responsibility for. Check that the quoted total includes VAT and covers all of that work. Ask the party accounting for VAT to explain the rate used.

By |2026-11-15T00:24:46+01:002026-11-01|Building academy|Comments Off on Polish VAT on roof coverings and roof renovation work
Read More

How to check whether Polish grants cover asbestos removal and re-roofing

In Poland, begin the procedure at the municipal office responsible for the property. Ask whether a call is open and what work the support covers. Funding may pay for dismantling, collection, transport or disposal of waste, but it does not replace payment for a new roof covering. Before signing a contract, confirm the conditions, deadlines and how the contractor is chosen. Also find out how to report asbestos-containing products and what the funded scope includes. Do not order demolition in the hope of later reimbursement.

By |2026-11-14T20:34:50+01:002026-11-01|Building academy|Comments Off on How to check whether Polish grants cover asbestos removal and re-roofing
Read More

Unauthorised works in Poland: consequences and options for legalisation

In Poland, the consequences of unauthorised construction depend on the type of irregularity: missing required consent, failure to notify, or a significant deviation from the approved design may lead to supervisory proceedings, an obligation to prepare documentation, a fee, or demolition. Legalisation is not automatic. Before renovating an old roof, it is worth establishing both the condition of the structure and the legal scope of earlier works, because the irregularity may concern the whole building or part of it. It is essential to determine the date of the works, the requirements in force at that time, and the actual extent of the changes.

By |2026-11-14T17:10:09+01:002026-11-01|Building academy|Comments Off on Unauthorised works in Poland: consequences and options for legalisation
Read More

T35 trapezoidal steel sheet: practical benefits and price per square metre

In Poland, T35 trapezoidal sheet is sometimes chosen for roofs and cladding, but its advantages do not follow from the designation alone. A higher rib than the T18 family may help achieve stiffness, yet load capacity must be confirmed in the documentation for the specific sheet. When buying, check geometry, thickness and coating, and compare price per metre of actual coverage together with the necessary accessories. Also consider the roof or façade variant and the installation direction. Leave the selection decision to the designer, because the T35 symbol alone does not guarantee a suitable solution.

By |2026-11-14T17:11:04+01:002026-10-31|Building academy|Comments Off on T35 trapezoidal steel sheet: practical benefits and price per square metre
Read More

T18 and T35 trapezoidal sheets: working out the weight of a delivery

To correctly estimate the weight of T18 or T35 trapezoidal sheet, you must first establish which surface area the given unit mass refers to. Check whether the product data sheet states kilograms per square metre of covering or per square metre of the sheet's total area – these two values lead to different results. The designations T18 and T35 describe profile families, not one identical product, so weight can vary with steel thickness and geometry. To calculate delivery weight, sum the weight of all sheets according to their actual dimensions, then add the weight of packaging and accessories.

By |2026-11-14T20:37:08+01:002026-10-30|Building academy|Comments Off on T18 and T35 trapezoidal sheets: working out the weight of a delivery
Read More

Comparing T18 and T35 sheet prices per square metre of roof cover

In Poland, the price of T18 and T35 trapezoidal sheet depends primarily on the specification, not on the profile name alone. When comparing quotes, check whether the rate refers to a gross square metre or a square metre of coverage, and whether it includes tax. Ask for the total price of sheets, accessories and delivery. Remember that a wider sheet has a smaller effective coverage width, so two prices per square metre may describe different quantities of finished roof. Leave the choice of profile and support spacing to the designer.

By |2026-11-14T17:09:54+01:002026-10-30|Building academy|Comments Off on Comparing T18 and T35 sheet prices per square metre of roof cover
Read More

Tile-effect roofing prices: calculating the full cost of a new roof

The full price of a metal-tile roof depends on the format, coating, thickness and billing unit, not only on the price per metre of material. Before comparing offers, check whether they use the same covering unit, whether the amounts include tax, and whether laps, cuts, flashings and installation are included. For modules, establish the covering area of one piece, because the price of a sheet without this information says little. Compare labour for the same scope too, with flashings, gutters and scaffolding. The examples below compare cut-to-length sheets and modular panels from the same price list, effective from 28 October 2026.

By |2026-11-14T20:37:43+01:002026-10-29|Building academy|Comments Off on Tile-effect roofing prices: calculating the full cost of a new roof
Read More

How to choose insulation for a ceramic block wall?

The term ‘ceramic block’ alone is not enough to choose the insulation thickness. The type of block, the wall thickness, the mortar and the condition of the wall all matter. Only this data allows insulation options to be compared. In a small house, the reveals, plinth and eaves must also be checked. These often set the real constraints on the renovation. Ceramic blocks differ in their void arrangement and thermal properties. The wall may have different thicknesses and jointing methods. Calculations require data that correspond to the actual building element. Do not choose the lowest λ found for any block of similar appearance.

By |2026-11-14T10:55:51+01:002026-10-26|Building academy|Comments Off on How to choose insulation for a ceramic block wall?
Read More

When should you choose a first-grade panel and when should you consider outlet?

Outlet can lower the cost of the enclosure, but it requires a precise description of the material. Under this name you find surplus stock, end-of-series and panels with defects. These are different situations. First grade gives an easier reference point for the ordered properties. The choice should be driven by the requirements of the building and the condition of the specific batch, not by the discount alone. Ask why the panels were classified as outlet. Production surplus without defects is a different case from a deformed edge or damaged facing. The trade term alone does not say which properties have been retained. A description of each material group is needed.

By |2026-11-14T13:14:02+01:002026-10-22|Building academy|Comments Off on When should you choose a first-grade panel and when should you consider outlet?
Read More

Planning a farm building extension in stages

Today a machinery store is needed; in a few years, additional space for agricultural produce. Staging can align the investment with the farm's development. The most important plan, however, is drawn up before the first section is built. A steel hall prepared for extension requires more than free space behind the wall. The target function, the structural behaviour and the method of carrying out works alongside an occupied building must be established. The preliminary plan should show the final length of the steel hall and the arrangement of gates and access routes. Not all parameters need to be settled yet, but the direction of development should be clear. This way the first section will not occupy space needed for the future manoeuvring area. It is also easier to anticipate the routing of services.

By |2026-11-15T04:21:52+01:002026-10-21|Building academy|Comments Off on Planning a farm building extension in stages
Read More
Back to top