Building academy
The Izoprofil.org building academy explains decisions made during construction and refurbishment. The articles start with the materials themselves, including sandwich panels, PIR insulation boards and profiled sheet metal. Learn the terms used in product descriptions and how several properties affect a complete assembly. Topics include thermal insulation, joints, moisture protection, roof coverings and purchasing. Each article includes a summary and contents to help you find the relevant detail. Use the guides alongside the drawings and product documentation for your own project.
Why does a photovoltaic roof need ventilation beneath the covering?
Photovoltaic cells heat up during operation. The way heat is dissipated affects their temperature and energy yield. In an integrated roof, the space beneath the covering must therefore be designed deliberately. It is not a matter of any arbitrary void beneath the metal sheet, but of a layout that complies with the requirements of the system and of the entire building envelope. Overlooking this detail can impair both the performance of the installation and the moisture conditions of the roof. Only part of the radiation energy is converted into electricity. The remainder may be reflected or absorbed as heat. The temperature of the working surface therefore differs from that of the surrounding air. On a sunny day, wind and the possibility of air flow on both sides of the element also matter.
How do I choose the colour of trapezoidal steel sheet and avoid differences on the roof?
Two sheets with the same RAL number can look different due to gloss, texture and light. Over a large area the difference becomes more noticeable than on a small sample. It is worth combining the choice of colour with the selection of coating and flashings. With a dark covering, heating and product-specific limitations must also be taken into account. The number identifies the shade within a given colour system. It does not by itself describe gloss, texture, coating thickness or its intended use. Therefore an order for 'trapezoidal sheet in RAL 7016' is incomplete. The type of finish and the sheet parameters are also needed. A similar colour does not mean the same environmental resistance.
Clay tiles or tile-effect metal roofing: how to compare the options
Ceramic tiles and metal roofing differ in how they are laid on a roof. Metal is lighter, while ceramic consists of many small pieces, which affects the structure, transport and installation. When choosing, consider the whole roof, its shape and service conditions, not just a sample. Metal roofing places less load on the trusses, which helps during renovation or with a specific design. This does not excuse you from assessing the structure, as snow and wind still act on it.
Where does T7 perform best and how do you calculate its coverage?
T7 is a low profile that can look good on soffits and small cladding. Its advantage is the subtle surface pattern. However, it should not be treated like a taller trapezoidal roof sheet. The choice depends on the intended use of the specific variant, the support and the dimensions of the area. Calculations must use the coverage width, not the full sheet width. For example, a sheet with a 7 mm profile has an overall width of 1195 mm and an effective width of 1155 mm. This means that after joining adjacent strips you will not get the full 1195 mm from each piece. The usable dimension takes account of the joint geometry. Another T7 variant may have different values.
The role of the wall plate in a durable roof structure
In Poland, a wall plate is a timber beam connecting the roof truss to the top of the walls, but its role depends on the specific structural system. Readers should check the cross-section, anchoring, rafter connections, moisture protection and continuity of insulation at the eaves. The reference point should be the design and the matching fastener documentation, not a photograph from a neighbouring site. Before the eaves zone is covered, the support, condition of the timber and anchor layout should be assessed; doubts are resolved by the structural designer or site manager.
Five common metal roofing mistakes and how to avoid them
The most effective way to avoid common errors in a metal roof is to plan staged inspections rather than assess the finished slope. Before installation, check the actual roof dimensions, including diagonals, angles, eaves position and ridge line, because project data may differ from the built structure. Also establish responsibility for measurement and verify the material schedule before production. Batten spacing should match the specific covering, and design decisions are left to the designer.






