About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

Metal picket fences and wind: why gaps are only part of the picture

Gaps between pickets preserve the open character of the fence. They do not, however, stop the wind from acting on it. Every element has a surface area, and forces are transferred through the fixings to the structure. This is worth remembering, especially with a tall fence and on an open plot. Metal fence pickets must be selected as part of the whole system, not merely as coloured infill. A picket resists the flowing air. Its behaviour depends on, among other things, its shape, orientation and neighbouring elements. The free spaces change the flow conditions but do not eliminate all loads. Therefore it cannot be assumed that an open bay requires no wind assessment.

By |2026-11-15T19:34:51+01:002026-04-10|Building academy|Comments Off on Metal picket fences and wind: why gaps are only part of the picture

Designing a modern commercial building with a metal roof

The function of the company building should guide the choice of roof covering, not its appearance. Before specifying coatings and the layer build-up, give the designer details of the internal conditions: temperature, humidity and how work is carried out. A storage hall without heating has different requirements from a heated workshop or office. Check that the solution suits the span, installations and acoustics. Remember drainage and safe access for inspections. Quality depends on a complete design and careful details, so compare offers for the whole system.

By |2026-11-14T20:35:30+01:002026-04-03|Building academy|Comments Off on Designing a modern commercial building with a metal roof

Choosing roof insulation: PIR boards, mineral wool or EPS?

The choice of roof insulation material depends primarily on the roof construction, the available thickness and the working conditions. PIR provides high thermal resistance in a thin layer, mineral wool fits well into the space between rafters, and suitably selected EPS is widely used in flat roofs. Before purchase, check the product's intended use, declared lambda, reaction to fire and mechanical and moisture-related parameters. Also establish the layer build-up and ventilation method, because no material can replace a correct design and airtight execution.

By |2026-11-15T00:24:47+01:002026-03-29|Building academy|Comments Off on Choosing roof insulation: PIR boards, mineral wool or EPS?

Where should you start when installing sandwich panel cladding?

The sandwich panel is part of the cladding. It must fit the structure, openings and services. That is why preparing for installation begins earlier than unloading. First the panel layout and the sequence of details are established. Only then are the equipment and the crew selected. This plan limits cuts, downtime and corrections on a small building. Determine whether the interior will be permanently heated, periodically cooled or frequently washed. Moisture, temperature and the type of contaminants matter. Such a description allows the core, coatings and seals to be checked. The term ‘utility pavilion’ alone leaves too many unknowns.

By |2026-11-14T13:13:50+01:002026-03-27|Building academy|Comments Off on Where should you start when installing sandwich panel cladding?

How much does a garage shell made of panels cost and how do you plan the whole build?

The price of the panels is not the price of a finished garage. The material is only part of it: foundations, structure, door, flashings and installation all add to the cost. The choice of panels depends on whether the interior will be heated and what it will be used for. The example below shows how to calculate a small structure. The amounts are assumed for the calculation and do not constitute a current quote. Storing a car, a workshop and a heated workroom place different demands. Determine the temperature and the duration of use. A wet car brings in water, so proper ventilation is needed. Insulation limits heat flow but does not remove moisture. It will not provide heating without a heat source.

By |2026-11-14T13:11:13+01:002026-03-17|Building academy|Comments Off on How much does a garage shell made of panels cost and how do you plan the whole build?

What determines the support spacing for a wall sandwich panel under wind load?

Support spacing does not depend solely on the thickness of the wall sandwich panel. Wind, cladding, core and span arrangement all matter. The fixings must also be checked. A lightweight envelope can transfer considerable suction forces. A ready-made table from another project is therefore not enough. The selection should relate to the specific façade and its load zones. Establish the location, height, dimensions and surroundings of the building. Wind assessment is also influenced by the roof shape and the arrangement of openings. A pavilion on open terrain may behave differently from a similar building in dense development. The load is not chosen solely by the name of the city.

By |2026-11-14T13:14:55+01:002026-03-02|Building academy|Comments Off on What determines the support spacing for a wall sandwich panel under wind load?

Safe snow clearance on sheet metal roofs

Safe snow removal from a metal roof requires planning the work at height and controlling the load on the structure, not merely judging snow depth from the yard. You should check the snow's mass and distribution, the condition of the covering, and the loads envisaged for the specific structure, because there is no single safe number of centimetres. The task should be carried out by properly prepared people with suitable equipment, protecting both themselves and the metal coating. In case of doubt, a technical assessment is needed, and design decisions are left to the designer.

By |2026-11-14T20:35:48+01:002026-02-26|Building academy|Comments Off on Safe snow clearance on sheet metal roofs

Buying metal roof tiles: four checks before placing an order

Before comparing quotes, prepare a complete set of roof data, because without it the seller will price only the material, not the whole covering. Check whether the profile and minimum pitch suit your slope, whether the sheets can be laid out without unnecessary waste, and whether the quote includes flashings, screws and accessories. For a renovation, ask for an assessment of the structure's condition. Compare options for the same dimensions and scope of work, and leave the choice of parameters to the designer or installer familiar with the model's instructions.

By |2026-11-15T04:20:49+01:002026-02-23|Building academy|Comments Off on Buying metal roof tiles: four checks before placing an order

Is tile-effect metal roofing still a good choice?

In Poland, metal roof tiles remain a solution worth considering if they suit the design and the intended appearance of the house. Before deciding, check whether the chosen model matches the roof pitch, how the details are resolved and what type of coating is used. Cost-effectiveness depends on the whole roof and its later use, not on the sheet price alone. In renovation, the low weight of the covering can be an advantage, but the condition of the trusses and substrate requires assessment. Also compare formats and the full list of items in the quote.

By |2026-11-14T17:11:24+01:002026-02-20|Building academy|Comments Off on Is tile-effect metal roofing still a good choice?

How to compare a metal roofing quotation with other roof coverings

Compare the cost of a metal roof with other coverings only at the level of a finished roof with the same requirements, because the price of material per metre describes only part of the expenses. Check whether the offers include the substrate, cuttings, flashings and labour, and in a renovation also dismantling and structural repairs. Establish the intended use of the attic, the insulation performance and the necessary accessories, so that the comparison does not set a variant with insulation and finishing against one with only the surface material. Divide the estimate into structure, substrate, covering, details, transport and execution to assess where savings actually arise.

By |2026-11-15T00:21:49+01:002026-02-02|Building academy|Comments Off on How to compare a metal roofing quotation with other roof coverings
Back to top