Building academy2026-11-15T19:17:48+01:00

Choose a product group

Metal roofing

Blachy trapezowe — ilustracja kategorii

Sandwich panels

Płyty warstwowe — ilustracja kategorii

PIR insulation boards

Płyta izolacyjna PIR z cienką folią — ilustracja kategorii

XPS

Płyty XPS — ilustracja kategorii

Accessories

Wkręty i łączniki — ilustracja kategorii

Fencing

Sztachety metalowe — ilustracja kategorii

Building academy

The Izoprofil.org building academy explains decisions made during construction and refurbishment. The articles start with the materials themselves, including sandwich panels, PIR insulation boards and profiled sheet metal. Learn the terms used in product descriptions and how several properties affect a complete assembly. Topics include thermal insulation, joints, moisture protection, roof coverings and purchasing. Each article includes a summary and contents to help you find the relevant detail. Use the guides alongside the drawings and product documentation for your own project.

Unevenness or a defect? How to assess the appearance of metal fence pickets

Profiled sheet metal does not look identical in every light. The embossings create reflections, and the colour changes perception depending on the viewing angle. At the same time, actual dents or coating damage must be noticed before installation. Assessing metal fence pickets therefore requires calmly separating optical impressions from the condition of the product. Not every visible difference is a defect, but none should be dismissed out of hand. The basis for assessment is the specification. It should define the profile, length, finish, colour and type of end. Without this data it is difficult to determine whether the delivery is compliant. Similar pickets may have a different groove pattern or a different rear. They should not be compared with a random photo of another variant.

How do you match roof sheet thickness to the profile and supports?

There is no single sheet thickness suitable for every roof. The same sheet can perform differently with a different support spacing and load. The height and geometry of the profile are also important. When ordering, a distinction must be made between the steel and the protective layers. The choice is based on the data for the specific product and structure, not just on the price of the sheet. Check whether the specification refers to the nominal steel thickness and how the coatings are described. Metallic and organic protections are not the same as the steel core of the sheet. A total measurement with a micrometer does not always correspond to the value that should be used to verify load-bearing capacity.

Stains below a parapet: checking the metal coping and its joints

Dark streaks under a parapet are often the result of poorly directed water. Not every stain, however, means a leak through the flashing. Water may run down its outer surface or pass beneath a joint. The parapet coping should be assessed as a sequence of elements, corners and terminations. The roof's tightness also depends on the layers beneath the covering. The visible sheet metal alone does not describe the whole solution. A photograph of the façade taken after rainfall is useful. It shows whether water leaves a trace under every joint or only in one place. A regular pattern of streaks may suggest a repeating detail. A single stain at a corner, on the other hand, requires checking the local termination.

How do you select the thickness of a sandwich panel to meet project requirements?

The panel thickness is selected after establishing the conditions for the entire building. A comparison of the core λ alone is not sufficient. Panel parameters, thermal and fire requirements and load calculations are needed. Moisture and connections must also be assessed. Standards organise the method of assessment, but they do not provide a single thickness suitable for every building. Determine the room's purpose, temperature and pattern of use. The designer should indicate the correct basis of requirements for the given project. Selection should not be based solely on the abbreviation 'WT 2021'. The type of works, the regulations in force and any transitional rules are significant.

PIR or XPS for a flat roof: what determines the choice?

On a flat roof, the layer build-up is chosen first, and only then the insulation. A material beneath the waterproofing performs differently from a material laid above it. PIR and XPS can have different applications and parameters. Comparing λ alone ignores water, load and usage. These conditions are crucial for the durability of the roof. In a typical traditional build-up, the thermal insulation is located beneath the waterproofing layer. In an inverted roof the order is different: the thermal insulation lies above the waterproofing. It is therefore exposed to different moisture conditions. It requires a material intended and proven for such an application.

Renovating a barn while preserving its character: choosing the roof covering

Renovating a barn does not have to mean completely changing its appearance. A corrugated roof can retain the simple rhythm and the utilitarian character of the building's form. Corrugated fibre cement sheets should, however, be chosen on more than just their similarity to the old covering. The condition of the structure, the proportions of the sheets and the details at the eaves and gables all matter. Asbestos-free fibre cement makes it possible to consider a contemporary material in a traditional form, provided the solution is matched to the building and its future function. A barn's appearance is determined not only by the roof colour and the type of walls. The height of the ridge, the width of the eaves, the lines of the gables and the proportions of the large surfaces are also important. It is worth photographing these features before renovation and identifying which are to be retained.

Back to top