Choose a material

Roofing sheets

Blachy trapezowe — ilustracja kategorii

Sandwich panels

Płyty warstwowe — ilustracja kategorii

PIR insulation boards

Płyta izolacyjna PIR z cienką folią — ilustracja kategorii

XPS

Płyty XPS — ilustracja kategorii

Accessories

Wkręty i łączniki — ilustracja kategorii

Fencing

Sztachety metalowe — ilustracja kategorii

PIR insulation

PIR in an agricultural building: what to expect from IDELCO AGRO+

At a glance

IDELCO AGRO+ is a PIR board for insulating ceilings in agricultural buildings, not a structural panel with an arbitrary span. The stated length of up to 13 m refers to a made-to-order element, so it does not replace data on support spacing and the entire system. When assessing the building envelope, a distinction must be made between the broader terms “polyurethane boards” and “polyurethane foam” and the PIR product designation, and the function of the white facing visible in the ceiling must be checked: lightly embossed AGRO+ aluminium sheet with a thickness of 50 micrometres, different from the thin roof laminate. The visible surface, the terminations and ceiling maintenance are part of assessing the application of this variant; they must be linked to the building’s conditions of use.

Thin PIR board with a smooth white surface and visible light-coloured core

AGRO+ PIR boards with a visible aluminium facing

The assessment of AGRO+ covers both insulation performance and the appearance and maintenance of the visible surface. These are different criteria that a single thermal value does not settle. During inspection, check the orientation of the white and natural sides and the termination at walls, relating them to the adopted method of installation.

Lambda 0.023 and the conditions of an agricultural building

For IDELCO AGRO+, the declared lambda is 0.023 W/(m·K), not the 0.022 known from other PIR boards. At 100 mm this corresponds to R_D 4.30 m²K/W. Entering 0.022 changes the comparison result, so the value must be read for this variant.

The parameters should be read for the AGRO+ variant intended for agricultural buildings, because a similar notation does not necessarily mean the same thing. Automatically entering 0.022 from other PIR boards changes the comparison result. Selecting the thickness for the temperature and the way the building is used requires the product data sheet and assumptions about humidity and interior ventilation, so that the figures refer to the actual layer.

Polyurethane insulation from made-to-length elements

The element width is 1200 mm, and the length is made to order – the data sheet states a range of up to 13 m. The longer the element, the fewer transverse joints during installation, so when assessing the workmanship it is worth inspecting a product of this width and the ordered length.

Transport and support of long AGRO+ elements must be agreed before production. The permissible length of up to 13 m does not mean an equally large clear span – the structural rules are checked separately. The installation plan should limit the number of transverse joints, but must not disregard the structural requirements; at acceptance, check the length measurements, the support spacing and the method of safely handling the elements.

Selection of edges and installation profiles

AGRO+ is available in variants with a square edge, an overlap and a notch intended for a profile. Which of these is used follows from the adopted installation solution – when analysing the joints, the correct edge variant must therefore be identified.

Repair is preceded by matching the AGRO+ edge to the intended installation solution. Appearance alone is not enough: similarity to another panel does not confirm that its interlock can be recreated here. Check the profile type, the way cuts are made, the recommendations for cleaning the coating and the history of previous work – this allows durable terminations to be made and the correct visible surface to be preserved.

Product reaction and ceiling classification

For the AGRO+ product itself, the data sheet states reaction-to-fire class D-s2,d0, while a different result relates to a specific application with a profile. The latter result is not transferred to every ceiling, so when reading the documentation the two statements must be kept separate.

The scope of the declaration covers the reaction of the AGRO+ product and the classification of a specific ceiling separately; a result obtained with a profile does not describe any arbitrary configuration. Fire requirements are therefore assessed on the basis of the relevant assembly, and condensation and ventilation conditions are checked separately. In cases of ambiguity, one must consult the document for the given assembly and the solution for removing moisture from the building.

Insulation with polyurethane: ordering and logistics for AGRO+

In the order for AGRO+, the lengths of the individual elements, the thickness, the finish of the visible side and the edge type are specified. The unloading location and the length of the carrying route determine the transport conditions. When assessing an offer or completed works, the order is considered according to the lengths of the individual elements.

Access to the ceiling and the unloading location for long AGRO+ boards must be established before comparing quality or price. A board cut to size reduces part of the cutting but leaves less freedom to correct the measurement. Cost and quality are assessed on the basis of the schedule of elements, profiles, supports, flashings and means of access to the work site.

A case worth considering

When reading AGRO+ data, it is easy to confuse the orderable length with the structural span of the board. These are different pieces of information. If an offer states 13 m, one should ask about the support solution for the specific ceiling, because the number alone does not determine the load-bearing capacity. Similarly, the appearance of the aluminium surface does not indicate the fire classification conditions of the application — the assessment must be based on the relevant document and cross-section.

7 branches. Materials closer to your project.

Izoprofil.org map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E
  • BŁONIE — ul. Sochaczewska 138A
  • RADOM — ul. Grobickiego 8
  • ŁÓDŹ — Natolin 8
  • OLSZTYN — Barczewo, ul. Prosta 9
  • WROCŁAW — ul. Jerzmanowska 10C
  • GORZÓW WLKP. — ul. Zielona 33/34

Check prices and availability: +48 500 409 109

Free quote

Materials for your project