PIR MIX insulation board, 20 mm, second grade

Original price was: 2,32 €.Current price is: 2,28 €. incl. VAT / m²Lowest recorded price since 16.11.2026: 2,28 € incl. VATPrice monitoring: 30 days. No price history from before the reduction is available.

In stock

Mixed stock of PIR insulation boards. Thickness in this offer: 20 mm (2 cm). Second grade.

Batch formats listed: 1200 × 2400 mm or 1200 × 2500 mm. Approximate density: 30 kg/m³. Prices and sales quantities are expressed in m².

The mixed-stock listing gives a thermal conductivity range of 0.022 to 0.027 W/(m·K). For a particular board, check the manufacturer’s marking and declaration of performance.

Boards may be bowed or have locally underfilled cores. Straight-edged boards may also be supplied. Check the photographs and the condition of the available batch before choosing boards.

Brands and thicknesses vary across the MIX range. Ask separately about availability of other thicknesses in the 20–200 mm range.

Names listed in this MIX range include Unilin, termPIR, Thermano, Bauder, Soprema, Recticel, Kingspan and IKO. The brand supplied depends on the batch.

In stock

Description

Free quote — +48 500 409 109

PIR MIX — second-grade insulation board for deliberate cutting

PIR MIX is a second-grade insulation board, supplied in the thickness stated in the trade name. A batch may contain different brands, formats and production runs, so each delivery must be assessed individually. The suitability of a given batch for a project is determined by its actual condition, marking and the manufacturer’s declaration.

Assessing flatness and edges

Possible deviations from flatness and straight edges affect how the boards are cut and laid. Before installation, check whether local unevenness will hinder fitting the boards tightly together.

Local core voids

Core voids are local in nature and therefore do not determine the quality of the whole board. Establish whether a void falls within an area that requires continuous insulation or can be avoided when cutting.

Planning cuts around local defects

Mark the visible void and the intended edges of the finished piece on the board. If the cut layout overlaps the defect, select a different part of the board.

After setting out the cuts, add up the area of the pieces that can be used as designed. Keep this figure with the batch identification and dimensions.

Find PIR insulation offers – second and third quality, outlet in the SteelProfil shop

What our customers say

Back to top