PIR PW core for insulation, second grade, thickness 100 mm

8,26 € incl. VAT

In stock

PIR PW 100 mm polyurethane / polyisocyanurate core
Polyisocyanurate (PIR) insulation
PIR PW — sandwich-panel insulation core
MIXED THICKNESSES AND WIDTHS — SORTING REQUIRED
Thickness: 100 mm / 10 cm
Width: 1,000–1,100 mm
Sheet length: 1,000–3,000 mm (mixed lengths)
Sales unit: m²
Foam type: PIR (polyisocyanurate)
Density: 40 kg/m³
Grade: second grade
Thermal conductivity λ: 0.022–0.027 W/(m·K)

In stock

Description

Free quote — +48 500 409 109

PIR PW insulation core from sandwich panels

Insulation does not always need a presentable facing or a uniform format. Where there is time to fit the material, PIR PW provides an opportunity to use sandwich-panel core insulation on a limited budget. This bare second-grade material is also supplied in mixed sizes. Its advantage comes from matching the actual batch to a straightforward, protected application.

1 Making use of the foam again

The main value of PIR PW lies in its foam structure, which restricts heat flow. Where selected pieces retain suitable condition and continuity, they may serve as insulation infill without a decorative surface. This uses the core in places where a finished metal-faced panel would add no necessary benefit. Assess what the batch actually contains: thickness, format, damaged areas and usable surfaces. Instead of paying for features unnecessary in that detail, the buyer spends on useful insulation. This is particularly relevant to utility work carried out at a flexible pace.

2 Formats suited to small fields

Mixed lengths and widths can be practical for insulating smaller spaces between construction elements. Pieces can be matched to the available layout, including shorter sections that would be less convenient over a large continuous surface. The material is light and relatively easy to cut, simplifying handling. Compared with new uniform boards, it requires more selection work but may lower the cost of the infill itself. It works best where the schedule is flexible and individual fitting is possible, while factory-uniform dimensions are not the main purchasing requirement. Time spent fitting pieces may be easier to accommodate in a small utility structure than on a large project with a tight programme.

3 Savings based on appropriate use

Treat PIR PW as a separate material category rather than a complete sandwich panel that merely lacks an attractive finish. The bare core does not replace the panel’s facings, load-bearing performance or documented behaviour as a whole. Nor is it automatically a certified substitute for every new insulation board. Benefits arise in protected infill and details permitting material whose properties have been checked for that batch. A new board with complete documentation may be more convenient over a large area with strict thermal requirements. Where useful insulation, selection and careful material use matter most, PIR PW offers an alternative. The foam must be treated as a combustible material.

SteelProfil has second-grade PIR PW available from stock and also offers first-grade boards in the wider range. We help compare a batch with its intended use. Promotions and favourable prices support selection based on the amount of insulation that can actually be used and the work involved.

Find PIR PW in the SteelProfil shop

What our customers say

Back to top